An architect is designing the network architecture for a multi-site VMware Cloud Foundation (VCF) deployment using NSX Federation. The environment spans two geographically dispersed data centers (Site A and Site B) to support disaster recovery, workload mobility, and consistent security policies across sites.
During the design workshop, the architect determined that the solution must leverage NSX Federation for stretched networking to support overlay transport, routing, and high availability.
Which five design decisions are required when implementing NSX Federation in a multi-site VCF environment? (Choose five.)

• A. Limit round-trip latency between sites to 150 ms or less to enable optimal workload mobility and policy synchronization.
• B. Ensure end-to-end MTU of at least 1,700 bytes on the underlay network to support Geneve encapsulation for federated overlays.
• C. Use DHCP IP pools for host and Edge Tunnel Endpoints (TEPs).
• D. Configure a stretched Global Tier-0 Gateway for North/South connectivity of spanning segments with BGP.
• E. Require NSX Edge nodes at both sites for all federated constructs, even when using Distributed Transit Gateways for VPCs.
• F. Deploy a Global Manager in one site to centrally configure and synchronize spanning Tier-0 and Tier-1 gateways.
• G. Configure separate local Tier-1 gateways for site-specific segments, in addition to a spanning Tier-1 for cross-site communication.
• H. Ensure end-to-end MTU of at least 1,500 bytes on the underlay network to support Geneve encapsulation for federated overlays.

A customer is planning to implement a VMware Cloud Foundation (VCF) environment to support a mix of production and development virtualized workloads. The customer intends to use vSAN as the principal storage solution for both environments. During the initial planning meeting, the following requirements were identified:
* The production environment requires high availability and fault tolerance, with at least 1 copy of each VM ' s data.
* The development environment needs to be able to tolerate availability, with 2 copies of each VM ' s data.
* The customer is planning to deploy 15 ESX hosts in the cluster.
* The customer expects to onboard 475 virtual machines in the production environment and 250 VMs in the development environment, with an average disk size of 275 GB per VM.
* The customer requires storage policies that provide redundancy and high performance in the development environment but can afford lower redundancy and performance in the production environment.
Given these requirements, which two factors will impact the storage design for this VCF implementation?
(Choose two.)

• A. Type of storage policies used in vSAN (e.g., FTT, stripe width)
• B. Number of virtual machines and their resource allocation
• C. Network bandwidth for workload traffic
• D. Number of physical host NICs allocated to ESX management traffic
• E. Total number of ESX hosts in the cluster

An architect is designing for a VMware Cloud Foundation (VCF) workload domain to use vSAN, with the following requirements:
* Must support large-scale analytics workloads with ingestion patterns that show burst activity.
* Must ensure stable latency and highly sustained throughput even during cluster expansion and internal component balancing.
Which two design decisions directly address the design trait of performance? (Choose two.)

• A. Use vSAN ESA to attain Adaptive Write Path.
• B. Use compression-only mode for vSAN OSA.
• C. Use vSAN OSA with RAID-6 storage policies.
• D. Ensure consistent hardware generations across nodes.
• E. Disable automatic rebalancing.

During the design workshop, the customer stated the following requirement:
* The solution must support secure communication.
Which design decision should be included in the logical design for the workload domain?

• A. Ensure the host servers have TPM 2.0 hardware.
• B. Verify all physical components used for the deployments are on the hardware compatibility list.
• C. Set promiscuous mode port group security policy to Reject.
• D. Use a SHA-2 algorithm or higher for signed certificates.

An architect is designing an environment to make three applications available to five users using a self-service catalog in VMware Cloud Foundation (VCF) Automation.
* Users 1 and 5 need the ability to deploy the marketing application.
* Users 2 and 3 need the ability to deploy the inventory application.
* Users 1, 3, and 4 need the ability to deploy the HR application.
* If a user does not need access to an application, it should not be presented in their catalog.
Which design decision will present the listed applications to the associated users?

• A. Map all three applications to a single project. Assign users 1 and 3 to the shared applications project, and users 2, 4, and 5 to the dedicated applications project.
• B. Map each application to a separate project. Assign users 1 and 3 to the shared applications project, and users 2, 4, and 5 to the dedicated applications project.
• C. Map all three application blueprints to a single project. Assign users 1 and 5 to the marketing blueprint, users 2 and 3 to the inventory blueprint, and users 1, 3, and 4 to the HR blueprint.
• D. Map each application blueprint to a separate project. Assign users 1 and 5 to the marketing project, users 2 and 3 to the inventory project, and users 1, 3, and 4 to the HR project.