Three different versions for easy pass

Many candidates usually don't have abundant time. Some of them are too busy to prepare for the exam. Our accurate GB0-371 Dumps collection can help you pass the exam quickly and save a lot of time so candidates will benefit a lot in short term. Our accurate GB0-371 Dumps collection has three different formats.
PDF Version: It's easy to read and print, and candidates can rely on printed accurate GB0-371 Dumps collection to review when they're not convenient to use electronic products, and it's easy to take notes;
SOFT (PC Test Engine) Version: It simulates the H3C GB0-371 Troytec real test environment, greatly helps candidates adapt the exam mode. There is no limit about the number of installed computer, but GB0-371 PC Test Engine format can only run on the Windows operating system;
APP (Online Test Engine) Version of accurate GB0-371 Dumps collection: Electronic equipment is not limited which supports any electronic equipment like mobile phone or E-Book. GB0-371 online test engine can be used offline as long as you have downloaded it when your equipment is connected to the network at the first time. Our accurate GB0-371 Dumps collection is closely linked to the content of actual examination, keeps up with the latest information. You can get a good result easily after 20 to 30 hours study and preparation of our GB0-371 Dumps collection software.

Free Demo

There are so many learning materials and related products in the market, choosing a suitable product is beneficial for you to pass the H3C GB0-371 Troytec exam smoothly. Our accurate GB0-371 Dumps collection offers free demo. Customers can download the demon freely, experience our accurate GB0-371 Dumps collection, and then decide to buy it or not.

In the modern era of rapid development of this industry, the requirements for H3C employees are increasing day by day. Passing H3C GB0-371 Troytec exam would be helpful to your career. Serves as a leader in this industry, our company provides the best service and high-quality GB0-371 Dumps collection which can help our candidates pass the exam quickly. We can ensure that our GB0-371 examination database is the most latest, our H3C experts will check for the updates everyday, so you don't need to worry the quality of our accurate GB0-371 Dumps collection. The system will send our candidates the GB0-371 latest database automatically if there is any update. By the way, the time limit is one year after purchase. Another advantage of our accurate GB0-371 Dumps collection is allowing candidates to apply for full refund if you fail the exam. You can get a full refund or change another GB0-371 examination dumps freely as long as you provide your failed transcript, so you don't need to waste money to buy another review material even you fail the exam.

High-efficiency Service

We provide 24/7 (24 hours 7 days) online customers service. You can email us or contact our customer service staff online if you have any questions in the process of purchasing or using accurate GB0-371 Dumps collection. Our staff will reply you as soon as possible and answer your doubts, help you pass the H3C GB0-371 Troytec exam successfully.

Instant Download: Our system will send you the TroytecDumps GB0-371 braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Safe Payment Way

We adopt the most trusted and biggest payment platform Credit Card. Credit Card serves as a worldwide payment platform which ensures the security and protects buyers' interests. We can ensure your privacy security thus you can trust our platform and accurate GB0-371 Dumps collection. We always consider for the interests of our buyers.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. 图示为 SmartLink 与 Monitor Link 级联的组网应用交换机 SWH 上的 Smart Link 组作为交换机 SWH 上 Monitor Link 组的上行端口,而该 Monitor Link 组下行端口的对端端口为交换机 SWJ Smart Link 组的主端口交换机 SWH 上行 SWD 、 SWE 端口为 Smart Link 组端口从上述信息可以得知

A) 交换机 SWH 上行交换机 SWE 的链路为 Down 状态,则交换机 SWJSmart Link 组主端口会切换为副端
B) 交换机 SWH 上行交换机 SWD 的链路为 Down 状态,则交换机 SWJSmart Link 组主端口会切换为副端
C) 交换机 SWJSmart Link 组状态与交换机 SWH 无关
D) 交换机 SWH 上行交换机 SWD 和 SWE 的链路都为 Down 状态,则交换机 SWJSmart Link 组主端口会切换为副端口

2. 在如图所示的交换网络中,交换机 SWA 上设置 VLAN10 为 Isolate-user-vlan VLAN2 和 VLAN3 为 VLAN 10 的 Secondary VLAN ；交换机 SWB 上创建 VLAN2-VLAN20 ,并且设置 VLAN20 为 Isolate-user-vlan , VLAN4 为 VLAN20 的 Secondary VLAN 按照如图所示设置好各设备的 IP 地址后,下面说法正确的为（选择一项或多项)

A) PCA 的报文从 SWA 的 GigabitEthem1/0/3 端口出来,进入 SWB 的 GigabitEthe1/0/3 端口后所带的 VLAN Tag 为 VLAN2
B) PCA 的报文从 SWA 的 GigabitEther1/0/1 端口进入,从 GigabitEther1/0/3 端口出来后不带 VLAN Tag
C) SWB 访问 PCA 时,报文从 SWB 的 GigabitEthem1/0/4 所带的 VLAN Tag 为 VLAN 1
D) SWB 的报文从 SWA 的 GigabitEthem1/0/3 端口进入,从 GigabitEthem1/0/1 端口出来后所带的 VLANTag 为 VLAN2

3. 如图所示 PIM-DM 组网中,路由器 RT1 、 RT2 的部分单播路由表如下
<RT1>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
10.1.1.0/30 Direct 0010.1.1.2Port1
10.1.1.1/32 Direct 0010.1.1.1Port1
10.1.1.2/32 Direct 00127.0.0.1 InLoopO
11.1.1.0/30 Direct 0011.1.1.1Port2
11.1.1.1/32 Direct 00127.0.0.1 InLoopO
12.1.1.0/30 Direct 0012.1.1.1Port3
12.1.1.1/32 Direct 00127.0.0.1 InLoopO
100.1.1.0/240SPF 10 1563 10.1.1.1 Portl
127.0.0.0/8 Direct 00127.0.0.1 InLoopO
127.0.0.1/32Direct 00127.0.0.1 InLoopO
100.1.0.0/160SPF 10 311.1.1.2 Port2
<RT2>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
20.1.1.0/30 Direct 0020.1.1.2Port1
20.1.1.1/32 Direct 0020.1.1.1 Portl
20.1.1.2/32 Direct 00127.0.0.1 InLoopO
11.1.1.0/30 Direct 0011.1.1.2Port2
11.1.1.2/32 Direct 00127.0.0.1 InLoopO
22.1.1.0/30 Direct 0022.1.1.1Port3
22.1.1.1/32 Direct 00127.0.0.1 InLoopO
100.1.1.0/240SPF 10 1564 11.1.1.1 Port2
127.0.0.0/8 Direct 00127.0.0.1 InLoopO
127.0.0.1/32Direct 00127.0.0.1 InLoopO
100.1.0.0/160SPF 10 220.1.1.1 Portl
那么,路由器 RT1 、 RT2 的（ S , G )表项的出、入接口列表分别为

A) RT2 入接口列表: Portl
B) RT1 出接口列表: Port2 、 Port3
C) RT2 出接口列表: Port2 、 Port3
D) RT1 入接口列表: Portl

4. 二台路由器通过局域网连接在一起,组成 VRRP 备份组各接口上配置如下 :
[RTA-GigabitEthernet1/0] display this
ip address 192.168.0.252 255.255.255.0
vrrp vrid 1 virtual-ip 192.168.1.254
vrrp vrid 1 priority 120
[RTB-GigabitEthernet1/0] display this
ip address 192.168.0.253 255.255.255.0
vrrp vrid 1 virtual-ip 192.168.1.254
从上述信息可以得知

A) RTA 、 RTB 都处于 VRRP Master 状态
B) RTA 为备份组 Master 路由器
C) RTA 、 RTB 都处于 VRRP Initialize 状态
D) RTB 为备份组 Master 路由器

5. 客户的局域网交换机 SWA 通过 GigabitEthenet 2/0/1 连接 SWB 、通过 GigabitEthernet 2/0/2 连接 SWC 且 SWA 交换机有如下配置:
[SWA]stp region-configuration
[SWA-mst-region]instance 0 vlan 1 to 100
[SWA-mst-region]instance 2 vlan 101 to 200
[SWA]smart-link group 1
[SWA-smlk-group1 ]protected-vlan reference-instance 0
[SWA-smlk-group1]port gigabitethernet 2/0/1 master
[SWA-smlk-group1 ]port gigabitethernet 2/0/2 slave
[SWA] smart-link group 2
[SWA-smlk-group2]protected-vlan reference-instance 2
[SWA-smlk-group2]port gigabitethernet 2/0/2 master
[SWA-smlk-group2]port gigabitethernet 2/0/1 slave
如果 SWA 、 SWB 、 SWC 连接口允许所有 VLAN 通过,从上述信息可以得知

A) SWA 交换机 VLAN2 流量将通过 Gigabitethernet 2/0/2 上行
B) SWA 交换机 VLAN102 流量将通过 Gigabitethernet 2/0/1 上行
C) SWA 交换机 VLAN2 流量将通过 GigabitEthernet 2/0/1 上行
D) SWA 交换机 VLAN102 流量将通过 GigabitEthe 2/0/2 上行

Solutions: