Get Started NSE5_FMG-7.0 Exam [2023] Dumps Fortinet PDF Questions [Q11-Q32]

Get Started: NSE5_FMG-7.0 Exam [2023] Dumps Fortinet PDF Questions

NSE5_FMG-7.0 Premium Exam Engine pdf Download

Fortinet NSE5_FMG-7.0 exam is divided into multiple sections, and each section is designed to test the skills and knowledge of candidates in a specific area. NSE5_FMG-7.0 exam includes topics such as FortiManager installation and configuration, device management, policy management, and system management. Candidates are required to demonstrate their knowledge and skills in each of these areas to pass the exam and become certified as Fortinet NSE 5 - FortiManager 7.0.

The NSE5_FMG-7.0 exam consists of 60 multiple-choice questions that are designed to test the candidate’s knowledge of FortiManager 7.0. NSE5_FMG-7.0 exam covers a wide range of topics, including installation and configuration, policy management, device management, and troubleshooting. Candidates are required to score at least 70% to pass the exam.

 

NEW QUESTION # 11
An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?

• A. Trainer does not have full rights over this ADOM
• B. Trainer is not a part of workflow approval group
• C. Trainer must close Student's workflow session before approving the request
• D. Student, who submitted the workflow session, must first self-approve the request

Answer: B

NEW QUESTION # 12
Which two settings must be configured for SD-WAN Central Management? (Choose two.)

• A. The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.
• B. When you configure an SD-WAN, you must specify at least two member interfaces.
• C. SD-WAN must be enabled on per-ADOM basis
• D. You can create multiple SD-WAN interfaces per VDOM

Answer: B,C

NEW QUESTION # 13
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

• A. FortiManager will replace the deleted address object with all address object in the referenced firewall policy
• B. FortiManager will replace the deleted address object with the none address object in the referenced
  firewall policy
• C. FortiManager will disable the status of the referenced firewall policy
• D. FortiManager will not allow the administrator to delete a referenced address object

Answer: B

NEW QUESTION # 14
View the following exhibit.

When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)

• A. Once initiated, the install process cannot be canceled and changes will be installed on the managed device
• B. Provides the option to preview configuration changes prior to installing them
• C. Installs device-level changes to FortiGate without launching the Install Wizard
• D. Will not create new revision in the revision history

Answer: A,C

NEW QUESTION # 15
What is the purpose of the Policy Check feature on FortiManager?

• A. To find and provide recommendation to combine multiple separate policy packages into one common
  policy package
• B. To find and merge duplicate policies in the policy package
• C. To find and provide recommendation for optimizing policies in a policy package
• D. To find and delete disabled firewall policies in the policy package

Answer: C

NEW QUESTION # 16
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)

• A. External gateways are third-party VPN gateway devices only
• B. Managed devices in other ADOMs must be treated as external gateways
• C. Managed gateways are devices managed by FortiManager in the same ADOM
• D. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec VPN

Answer: B,C

NEW QUESTION # 17
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

• A. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
• B. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
• C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
• D. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

Answer: D

Explanation:
The configuration change will break the fgfm connection, causing the FortiGate unit to attempt to reconnect for 900 seconds. If the FortiGate cannot reconnect, it will rollback to its previous configuration.

NEW QUESTION # 18
View the following exhibit, which shows the Download Import Report:

Why it is failing to import firewall policy ID 2?

• A. The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate
• B. Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager
• C. Policy ID 2 does not have ADOM Interface mapping configured on FortiManager
• D. Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.

Answer: A

Explanation:
FortiManager_6.4_Study_Guide-Online - page 331 & 332

NEW QUESTION # 19
An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from?

• A. File system
• B. ADOM2
• C. ADOM2 object database
• D. ADOM1

Answer: B

NEW QUESTION # 20
Refer to the exhibit.

An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)

• A. The administrator profile does not have full access privileges like the Super_User profile.
• B. The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.
• C. The administrator logged in using the unsecure protocol HTTP, so the view is restricted.
• D. FortiAnalyzer features are not enabled on FortiManager.

Answer: A,D

NEW QUESTION # 21
View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

• A. FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on
  FortiGate under central management.
• B. If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.
• C. During discovery, the FortiManager NATed IP address is not set by default on FortiGate.
• D. FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

Answer: C,D

Explanation:
Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.

NEW QUESTION # 22
Refer to the exhibit.

Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)

• A. You cannot assign the same ADOM to multiple administrators
• B. It allows making configuration changes for managed devices on FortiManager panes
• C. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate
• D. It supports the FortiManager script feature

Answer: B,D

Explanation:
"FortiGate units in the ADOM will query their own configuration every 5 seconds. If there has been a configuration change, the FortiGate unit will send a diff revision on the change to the FortiManager using the FGFM protocol."

NEW QUESTION # 23
Refer to the exhibit.

An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

• A. 10.200.1.0/24
• B. 192.168.0.1/24
• C. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
• D. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.

Answer: A

Explanation:
FortiManager_6.4_Study_Guide-Online - page 209
In the example, the dynamic address object LocalLan refers to the internal network address of the managed firewalls. The object has a default value of 192.168.1.0/24. The mapping rules are defined per device. For Remote-FortiGate, the address object LocalLan referes to 10.10.11.0/24. The devices in the ADOM that do not have dynamic mapping for LocalLan have a default value of 192.168.1.0/2.

NEW QUESTION # 24
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

• A. FortiManager will replace the deleted address object with all address object in the referenced firewall policy
• B. FortiManager will disable the status of the referenced firewall policy
• C. FortiManager will not allow the administrator to delete a referenced address object
• D. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy

Answer: D

NEW QUESTION # 25
An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?

• A. It compares and provides differences in configuration on FortiManager with the current running
  configuration of the specified FortiGate.
• B. It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.
• C. It installs the provisioning template configuration on the specified FortiGate.
• D. It installs the latest configuration on the specified FortiGate and update the revision history database.

Answer: B

NEW QUESTION # 26
View the following exhibit.

Which statement is true regarding this failed installation log?

• A. Policy ID 2 is installed without a source address
• B. Policy ID 2 will not be installed
• C. Policy ID 2 is installed without a source device
• D. Policy ID 2 is installed in disabled state

Answer: C

NEW QUESTION # 27
Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

• A. The latest revision history for the managed FortiGate does match with the FortiGate running configuration
• B. Configuration changes directly made on the FortiGate have been automatically updated to device-level
• C. Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed
• D. The latest history for the managed FortiGate does not match with the device-level database

Answer: A,D

Explanation:
database
Explanation:
STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: up - dev-db: modified - This is the device setting status which indicates that configuration changes were made on FortiManager. - conf: in sync - This is the sync status which shows that the latest revision history is in sync with Fortigate's configuration. - cond: pending - This is the configuration status which says that configuration changes need to be installed.
Most probably a retrieve was done in the past (dm: retrieved) updating the revision history DB (conf: in sync) and FortiManager device level DB, now there is a new modification on FortiManager device level DB (dev-db: modified) which wasn't installed to FortiGate (cond: pending), hence; revision history DB is not aware of that modification and doesn't match device DB.
Conclusion: - Revision DB does match FortiGate. - No changes were installed to FortiGate yet. - Device DB doesn't match Revision DB. - No changes were done on FortiGate (auto-update) but configuration was retrieved instead
After an Auto-Update or Retrieve: device database = latest revision = FGT
Then after a manual change on FMG end (but no install yet): latest revision = FGT (still) but now device database has been modified (is different).
After reverting to a previous revision in revision history: device database = reverted revision != FGT

NEW QUESTION # 28
View the following exhibit:

An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the firewall policy for port1?

• A. port1 on FortiGate and WAN on FortiManager
• B. WAN zone on FortiGate and WAN zone on FortiManager
• C. port1 on both FortiGate and FortiManager
• D. WAN zone on FortiGate and WAN interface on FortiManager

Answer: A

NEW QUESTION # 29
In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

• A. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.
• B. Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device
• C. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.
• D. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Answer: C

Explanation:
FortiManager_6.4_Study_Guide-Online - page 346
FortiManager HA doesn't support IP takeover where an HA state transition is transparent to administrators. If a failure of the primary occurs, the administrator must take corrective action to resolve the problem that may include invoking the state transition. If the primary device fails, the administrator must do the following in order to return the FortiManager HA to a working state:
1. Manually reconfigure one of the secondary devices to become the primary device
2. Reconfigure all other secondary devices to point to the new primary device

NEW QUESTION # 30
In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

• A. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.
• B. Secondary device with highest priority will automatically be promoted to the primary role, and manually
  reconfigure all other secondary devices to point to the new primary device
• C. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.
• D. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Answer: C

Explanation:
FortiManager_6.4_Study_Guide-Online - page 346
FortiManager HA doesn't support IP takeover where an HA state transition is transparent to administrators. If a failure of the primary occurs, the administrator must take corrective action to resolve the problem that may include invoking the state transition. If the primary device fails, the administrator must do the following in order to return the FortiManager HA to a working state:
1. Manually reconfigure one of the secondary devices to become the primary device
2. Reconfigure all other secondary devices to point to the new primary device

NEW QUESTION # 31
An administrator's PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM?

• A. Log in as Super_User in order to unlock the ADOM.
• B. Delete the previous admin session manually through the FortiManager GUI or CLI.
• C. Log in using the same administrator account to unlock the ADOM.
• D. Restore the configuration from a previous backup.

Answer: B

NEW QUESTION # 32
......

Pass Your Fortinet Exam with NSE5_FMG-7.0 Exam Dumps: https://www.troytecdumps.com/NSE5_FMG-7.0-troytec-exam-dumps.html

Verified NSE5_FMG-7.0 Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1p0MQ_OC9NgQ4q3Fbh1O6oElRbvoEetuS