Jun 25, 2023 Reliable Study Materials for HPE6-A81 Exam Success For Sure
100% Latest Most updated HPE6-A81 Questions and Answers
The HP HPE6-A81 exam is an Aruba Certified ClearPass Expert Written Exam that is designed for IT professionals who want to validate their skills and knowledge in implementing and managing Aruba ClearPass solutions. This exam is intended for those who have already obtained the Aruba Certified ClearPass Professional (ACCP) certification and are looking to further advance their expertise.
The HPE6-A81 certification exam is a written exam that consists of multiple-choice questions. The exam duration is 90 minutes, and individuals must achieve a score of 70% or higher to pass the exam. The exam fee is $200, and it can be taken at any Pearson VUE testing center worldwide.
NEW QUESTION # 24
Refer to the exhibit.
You have configured an Onboard portal for single SSID provision. During testing you notice that the QuickConnect Application did not display the "Connect" button, only the finish button. To get connected the test user had to manually connect to the secure-HS-5007 SSID but was prompted for a username and password. Using the screenshots as a reference, how would you fix this issue?
- A. Change the network settings to use EAP-TLS for the authentication protocol.
- B. Check the network settings for the correct SSID name spelling.
- C. Configure the SSID to support both EAP-PEAP and EAP-TLS authentication method
- D. Install a public signed HTTPS web server certificate on the ClearPass server
Answer: D
NEW QUESTION # 25
Refer to the exhibit.
A customer has incomplete information for endpoints in the Endpoint Repository. In order to make accurate decisions about what types of devices are connecting to the network. ClearPass is enabled to process the device information from IF-MAP interface, but no updates are received. What can the customer do to update those endpoints using IF-MAP?
- A. Configure ClearPass Management IP in the DHCP Helper address
- B. Configure IF-MAP on all networking devices to send additional information to ClearPass
- C. Configure IF-MAP only on Aruba Mobility Controller, providing ClearPass username and password
- D. Configure the authentication service to Audit the endpoints using, the embedded Nmap Server
Answer: A
NEW QUESTION # 26
Which statements art true about Aruba down loadable user roles? (select three)
- A. Downloadable role names must be defined in Aruba switch or controller.
- B. Administering downloadable user roles can be difficult for a large enterprise.
- C. Can be applied only on ports or WLAN users authenticated by ClearPass.
- D. Aruba downloadable user role are universally available across the environment.
- E. Can use these result for other authentication methods not involving ClearPass.
- F. Aruba downloadable user role is a built in enforcement template in ClearPass.
Answer: A,C,E
NEW QUESTION # 27
Your customer has recently implemented a seIf-registration portal in ClearPass Guest to be used on a Guest SSID broadcast from an Aruba controller Your customer has started complaining that the users are not able to reliably access the Internet after clicking the login button on the receipt page They tell you that the users will click the login button multiple times and after about a minute they gam access.
What could be causing this issue?
- A. The enforcement profile on ClearPass is set up with an IETF:session delay.
- B. The guest users are assigned a firewall user role that has a rate limit.
- C. The guest users are assigned multiple DNS servers delaying DNS response.
- D. The self-registration page is configured with a 1 minute login delay.
Answer: A
NEW QUESTION # 28
Which statement is true about Radius IETF attributes Called-Stat ion-Id and Calling-Station-ld?
- A. Called-Station-Id contains the mac address of the supplicant and SSID name while Calling-Station-Id contains the mac address of the authenticator.
- B. Called-Station-ld contains the mac address of the authenticator while Calling-Station-ld contains the mac address of the supplicant and SSID name.
- C. Called-Station-ld contains the mac address of the authenticator while Calling-Station-Id contains the mac address of the supplicant.
- D. Called-Station-ld contains the mac address of the supplicant while Calling-Station-ld contains the mac address of the authenticator.
Answer: B
NEW QUESTION # 29
Refer to the exhibit.
A customer has configured Onboard in a cluster. After the Primary server's failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting'
- A. Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server's hostname.
- B. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
- C. Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.
- D. Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).
Answer: A
NEW QUESTION # 30
A Customer has these requirements:
* 2.000 loT endpoints that use MAC authentication
* 6.000 endpoints using a mix of username/password and certificate (Corporate/BYOD) based authentication
* 1.000 guest endpoints at peak usage that use guest self-registration
* 1500 BYOD devices estimated as 3 devices per User (500 users)
* 2.500 endpoints that have OnGuard installed and connect on a daily basis What licenses should be installed to meet customer requirements?
- A. 11.500 Access. 500 Onboard. 2.500 OnGuard
- B. 9.000 Access. 500 Onboard. 2.500 OnGuard
- C. 13.000 Access. 1.500 Onboard. 2.500 OnGuard
- D. 11.500 Access. 1.500 Onboard. 2.500 OnGuard
Answer: D
NEW QUESTION # 31
Refer to the exhibit.
You have integrated the Cisco switch with ClearPass to do MAC-Auth for Cisco IP Phones. The phones connect to the network successfully but when you try to change the status of the device from the access tracker, you see only the ArubaOS Radius terminate session options and not the Cisco vendor terminate session options. What will you check to fix this issue?
- A. Verify that Cisco is chosen as the vendor name while adding the Cisco Switch under network devices.
- B. Verify if the ClearPass supports RADIUS Dynamic Authorization for the Cisco IP Phones doing MAC.AUTH.
- C. Verify if the Cisco IP Phone is actively connected to the switch to get the Cisco CoA options from ClearPass.
- D. Verify if the Enable RADIUS Dynamic Authorization option is checked for the Cisco switch added under the network devices.
Answer: A
NEW QUESTION # 32
Which statements are true about that integration between ClearPass Policy Manager and ClearPass Device Insight? (Select two)
- A. Policy Manager stops using ClearPass Profiler for fingerprinting and uses Device Insight Analyzer instead for endpoint in-depth data analysis.
- B. An attribute named Device Insight Tags art added to the Endpoints that art available to use in service, role-mapping, and enforcement policy Rules
- C. ClearPass Device Insight updates ClearPass Policy Manager every 60 minutes if it detects a change in device classification like device spoofing.
- D. When Device Insight integration mode is enabled. you can still use Update Fingerprint button to Update Endpoints at Configuration > Identity > Endpoints
- E. To provide enhanced profiling and reporting. additional configuration is required to transmit data in both directions between CPPM and Device Insight.
Answer: D,E
NEW QUESTION # 33
Refer to the exhibit.
The customer complains that the user shown cannot log into the ClearPess Server at an administrator using the [Policy Manager Admin Network Login Service]. What could be the reason for this?
- A. The account created does not fit this purpose.
- B. The local user authentication might be disabled.
- C. The mapping on the role should be changed to [RADIUS Super Admin]
- D. The user might be used for a TACACS authentication.
Answer: A
NEW QUESTION # 34
A customer has created a Guest Self-Registration page that they would like to use it as 'template' for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page.
What should be configured in order to accomplish this request?
- A. Save the "template" page as Master Self'Registration page.
- B. Save this "template" page as a new Skin to be used on other Self-Registration pages.
- C. Copy the "template" page and edit it each time a new Self-Registration Page is needed.
- D. Create child pages when creating new Self-Registration pages and select the "template" as Parent.
Answer: A
NEW QUESTION # 35
Refer to the exhibit.
A customer has configured Onboard in a cluster with two nodes. All devices were onboarded in the network through node1 but those clients fail to authenticate through node2 with the error shown What steps would you suggest to make provisioning and authentication work across the entire cluster? (Select three)
- A. Configure the Onboard Root CA to trust the Policy Manager EAP certificate root.
- B. Make sure that the EAP certificates on both nodes are issued by one common root Certificate Authority (CA).
- C. Configure the Network Settings in Onboard to trust the Policy Manager EAP certificate.
- D. Have all of the BYOO clients disconnect and reconnect to the network.
Answer: A,B,D
NEW QUESTION # 36
Refer to the exhibit.
What enforcement profile will be assigned to a client who has successfully completed the user and machine authentication with UNKNOWN posture token?
- A. Deny Access Profile
- B. Redirect to Aruba Dissolvable_page Profile
- C. Redirect to Aruba Quarantine Profile
- D. Redirect to Aruba OnBoard Portal
Answer: B
NEW QUESTION # 37
A customer is troubleshooting the OnGuard Client Activity and is looking into the Live Monitoring -> OnGuard Activity section. What is the Status field representing for this client ?
- A. the Client is successful authenticated
- B. the Client is online and sends keep-alive messages
- C. the Client has been successfully profiled
- D. the Client health status is HEALTHY
Answer: C
NEW QUESTION # 38
Refer to the exhibit.
The customer configured a guest operator access by creating a custom operator profile and the built-in universal ClearPass profile mapping translation rule. When he tests the setup, he gets authentication failed. Using the streenshots sent by the customer as a reference, what would suggest to the customer to fix the issue?
- A. To re-enter the correct username and password for the Active Directory user Mike07.
- B. To map the operator profile name HS_Receptionist in the translation rule value field
- C. To correct the case sensitive attribute name in the enforcement profile to admin_privileges
- D. To verify if the username Mike07 has the Active Directory Title attribute set as Reception.
Answer: B
NEW QUESTION # 39
A customer is planning to implement machine and user authentication on infrastructure with one Aruba Controller and a single ClearPass Server. What should the customer consider while designing this solution? (Select three.)
- A. Onboard must be used to install the Certificates on the personal devices to do the user and machine authentication
- B. The customer does not need to worry about Multi-Master Catht Survivability because the Controller will also cache the machine state.
- C. The machine authentication status rs written in the Multi-master cache on the ClearPass Server for 24 hrs
- D. The Customer should enable Multi-Master Cache Survivability as the Aruba Controller will not cache the machine state.
- E. The Windows User must log off. restart or disconnect their machine to initiate a machine authentication before the cache expires.
- F. Machine Authentication only uses EAP TLS. as such a PKI infrastructure should be in place for machine authentication.
Answer: A,C,E
NEW QUESTION # 40
You art deploying Cleat Pass Policy Manager with Guest functionality for a customer with multiple Aruba Networks Mobility Controllers. The customer wants to avoid SSL errors during guest access but due to company security policy cannot use a wildcard certificate on ClearPass or the Controllers.
What is the most efficient way to configure the customer's guest solution? (Select two.)
- A. Install multiple public certificates with a different Common Name on each controller
- B. Build one Web Login page with vendor settings for captiveportal-controller (company domain)
- C. Build one Web Login page with vendor settings for controller (company domain)
- D. Build multiple Web Login pages with vendor settings configured for each controller
- E. Install the same public certificate on all Controllers with the common name "controller.{company domain)
Answer: A,C
NEW QUESTION # 41
Which using Allow All MAC AUTH, which authentication source should be mapped to the service?
- A. Any Authentication source
- B. Static Host List
- C. Guest Device Database
- D. Endpoint Database
Answer: B
NEW QUESTION # 42
A customer has multiple Aruba Controllers integrated with ClearPass for guest access using a controller-initialed login method. The customer is aware that a public CA-signed captive portal certificate is required in Aruba controllers for controller-initiated workflows. The customer has purchased unique public CA-signed server certificates for each controller.
What configuration steps would you suggest to the customer to complete the deployment? (Select three.)
- A. From the weblogin/ self-registration page NAS Vendor settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
- B. From the weblogin/ self-registration page Login form settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
- C. From the Aruba controller, enable the option 'Add switch ip address in the redirection URL' under the respective guest AAA profile mapped in the VAP profile.
- D. Edit the HTML header in the weblogin/ self-registration register page with a script to match the controllers IP and captive portal certificate CN names respectively.
- E. Add all the controller IP address and its certificate common names in the DNS server's Forward Lookup Zones and Reverse Lookup Zones to resolve queries from client.
- F. From the Aruba controller, enable the option "Add switch IP address in the redirection URL" under the respective L3 Authentication profile mapped in the initial role
Answer: A,B,C
NEW QUESTION # 43
Which statements art true about the Database server certificate? (Select two)
- A. Database certificate can be created to take a secure backup of the ClearPass database.
- B. Custom Database certificate requires Subject Alternative Name (SAN) field with the DNS name of the server.
- C. A change in Database certificate will only be applicable after a reboot of the node
- D. ClearPass Policy Manager nodes validates the Database certificate while joining the cluster
- E. Database server certificate is optional for the ClearPass servers that are part of a Cluster.
Answer: B,D
NEW QUESTION # 44
While configuring the service rule conditions which NAS-Port-Type value should be used to differentiate the service for wired and wireless authentication?
- A. Ethernet (15) and Wireless-802 II (19)
- B. Ethernet (O)and W.reless-802 11 (1)
- C. Ethernet (19) and Wireless-802 11(18)
- D. Ethernet (5) and Wireless-802 11 (9)
Answer: D
NEW QUESTION # 45
Under OnBoard Management and Control, which option will deny the user from re-enrolling one of his devices with Onboard?
View by Certificate >> Click on the device >> Delete certificate
- A. Delete this client certificate View by Dev >> Click on the device
- B. Manage Access >> Deny access to this device View by Certificate
- C. View by Username >> Click on the user >> Delete Actions >> Delete all devices
- D. Click on the device >> Revoke certificate >> Revoke this client certificate
Answer: D
NEW QUESTION # 46
Refer to the exhibit.
A customer has just configured a Posture Policy and the T 2 -Health check Service. Next they installed the OnGuard Agent on a test client connected to the Secure_Employee SSID. When they check Access Tracker they see many WEBAUTH requests are being triggered What could be the reason'
- A. The OnGuard Agent is connecting to the Data Port interface on ClearPass.
- B. OnGuard Web-Based Health Check interval has been configured to three minutes.
- C. The OnGuard Agent trigger the events based on changing the Health Status.
- D. TCP port 6658 is not allowed between the client and the ClearPass server.
Answer: B
NEW QUESTION # 47
......
To be eligible for the HPE6-A81 certification exam, candidates must have at least three years of experience working with Aruba ClearPass and possess a solid understanding of network security concepts. The exam consists of 60 multiple-choice questions and lasts for 90 minutes. A passing score of 70% or higher is required to earn the Aruba Certified ClearPass Expert (ACCX) certification. This certification validates the candidate's skills in designing and implementing ClearPass solutions that meet the needs of modern network environments and prepares them for advanced roles in network security management.
New HP HPE6-A81 Dumps & Questions: https://www.troytecdumps.com/HPE6-A81-troytec-exam-dumps.html