Latest Apr-2024 NSK200 Dumps PDF And Certification Training
Check your preparation for Netskope NSK200 On-Demand Exam
NEW QUESTION # 29
Your company has a Symantec BlueCoat proxy on-premises and you want to deploy Netskope using proxy chaining. Which two prerequisites need to be enabled first in this scenario? (Choose two.)
- A. Disable SSL decryption.
- B. Disable the X-Authenticated-User header.
- C. Enable the X-Forwarded-For HTTP header
- D. Enable SSL decryption.
Answer: C,D
Explanation:
Explanation
To deploy Netskope using proxy chaining with Symantec BlueCoat proxy on-premises, you need to enable two prerequisites first: Enable SSL decryption on your Symantec BlueCoat proxy. This is required for proxy chaining because Netskope needs to inspect the SSL traffic that is sent from your proxy to the Netskope cloud.
To enable SSL decryption, you need to configure your Symantec BlueCoat proxy to trust the Netskope certificate for SSL interception. You can download the certificate from Settings > Manage > Certificates > Signing CA in the Netskope UI. Enable the X-Forwarded-For HTTP header on your Symantec BlueCoat proxy. This is required for proxy chaining because Netskope needs to identify the original source IP address of the user behind your proxy. The X-Forwarded-For header is used to pass this information from your proxy to Netskope. To enable this header, you need to configure your Symantec BlueCoat proxy to send X-Forwarded-For HTTP header for all HTTP requests. The other options are not valid prerequisites for this scenario. You do not need to disable SSL decryption on your Symantec BlueCoat proxy, as this would prevent Netskope from inspecting the SSL traffic. You do not need to disable the X-Authenticated-User header on your Symantec BlueCoat proxy, as this is an optional header that can be used to pass additional user information from your proxy to Netskope. References: Proxy Chaining3, Configure Forcepoint for Proxy Chaining
NEW QUESTION # 30
You are troubleshooting an issue with Microsoft where some users complain about an issue accessing OneDrive and SharePoint Online. The configuration has the Netskope client deployed and active for most users, but some Linux machines are routed to Netskope using GRE tunnels. You need to disable inspection for all users to begin troubleshooting the issue.
In this scenario, how would you accomplish this task?
- A. Create a Do Not Decrypt SSL policy for the Microsoft 365 App Suite.
- B. Create a steering exception for the Microsoft 365 domains.
- C. Create a Real-time Protection policy to isolate Microsoft 365.
- D. Create a Do Not Decrypt SSL policy for OneDrive.
Answer: A
Explanation:
Explanation
To disable inspection for all users accessing Microsoft 365, you need to create a Do Not Decrypt SSL policy for the Microsoft 365 App Suite. This policy will prevent Netskope from decrypting and analyzing the traffic for any Microsoft 365 app, regardless of the access method (Netskope client or GRE tunnel)3. This policy will also allow SNI-based policies to apply, but no deep analysis performed via Real-time Protection policies4.
Therefore, option B is correct and the other options are incorrect. References: Add a Policy for SSL Decryption - Netskope Knowledge Portal, Default Microsoft appsuite SSL do not decrypt rule - Netskope Community
NEW QUESTION # 31
You want to prevent a document stored in Google Drive from being shared externally with a public link. What would you configure in Netskope to satisfy this requirement?
- A. Real-time Protection policy
- B. API Data Protection policy
- C. Quarantine
- D. Threat Protection policy
Answer: B
Explanation:
Explanation
To prevent a document stored in Google Drive from being shared externally with a public link, you need to configure an API Data Protection policy in Netskope. An API Data Protection policy allows you to discover, classify, and protect data that is already resident in your cloud services, such as Google Drive1. You can create a policy that matches the documents you want to protect based on criteria such as users, content, activity, or DLP profiles. Then, you can choose an action to prevent the documents from being shared externally, such as remove external collaborators, remove public links, or quarantine2. Therefore, option B is correct and the other options are incorrect. References: API Data Protection - Netskope Knowledge Portal, Add a Policy for API Data Protection - Netskope Knowledge Portal
NEW QUESTION # 32
Which object would be selected when creating a Malware Detection profile?
- A. User profile
- B. DLP profile
- C. File profile
- D. Domain profile
Answer: C
Explanation:
Explanation
A file profile is an object that contains a list of file hashes that can be used to create a malware detection profile. A file profile can be configured as an allowlist or a blocklist, depending on whether the files are known to be benign or malicious. A file profile can be created in the Settings > File Profile page1. A malware detection profile is a set of rules that define how Netskope handles malware incidents. A malware detection profile can be created in the Policies > Threat Protection > Malware Detection Profiles page2. To create a malware detection profile, one needs to select a file profile as an allowlist or a blocklist, along with the Netskope malware scan option. The other options are not objects that can be selected when creating a malware detection profile.
NEW QUESTION # 33
You are given an MD5 hash of a file suspected to be malware by your security incident response team. They ask you to offer insight into who has encountered this file and from where was the threat initiated. In which two Skope IT events tables would you search to find the answers to these questions? (Choose two.)
- A. Page Events
- B. Alerts
- C. Network Events
- D. Application Events
Answer: B,D
Explanation:
Explanation
To find the answers to the questions posed by the security incident response team, you need to search in the Application Events and Alerts tables in Skope IT. The Application Events table shows the details of the cloud application activities performed by the users, such as upload, download, share, etc. You can filter the Application Events table by the MD5 hash of the file tofind out who has encountered this file and from which cloud service it was downloaded1. The Alerts table shows the details of the policy violations triggered by the users, such as DLP, threat protection, anomaly detection, etc. You can filter the Alerts table by the MD5 hash of the file to find out if this file was detected as malware by Netskope and what action was taken2. Therefore, options A and C are correct and the other options are incorrect. References: Application Events - Netskope Knowledge Portal, Alerts - Netskope Knowledge Portal
NEW QUESTION # 34
A customer wants to deploy the Netskope client on all their employee laptops to protect all Web traffic when users are working from home. However, users are required to work from their local offices at least one day per week. Management requests that users returning to the office be able to transparently leverage the local security stack without any user intervention.
Which two statements are correct in this scenario? (Choose two.)
- A. You must enable On-premises Detection in the client configuration.
- B. You must configure IPsec/GRE tunnels on the local network to steer traffic to Netskope.
- C. Youmust disable Dynamic Steering in the traffic steering profile.
- D. You must allow users to unenroll In the client configuration.
Answer: A,C
Explanation:
Explanation
To allow users to transparently leverage the local security stack when they return to the office, you need to follow these two statements: A. You must enable On-premises Detection in the client configuration and C.
You must disable Dynamic Steering in the traffic steering profile. On-premises Detection is a feature that allows the Netskope client to detect whether it is on-premises or off-premises based on a DNS or HTTP probe. You need to enable On-premises Detection in the client configuration and specify a domain name or an HTTP address that is only accessible from your local network3. Dynamic Steering is a feature that allows you to steer different types of traffic differently based on various criteria such as user group, location, category, etc. You need to disable Dynamic Steering in the traffic steering profile or create an exception for your local network to bypass Netskope and use your local security stack4. Therefore, options A and C are correct and the other options are incorrect. References: Client Configuration - Netskope Knowledge Portal, Dynamic Steering
- Netskope Knowledge Portal
NEW QUESTION # 35
An engineering firm is using Netskope DLP to identify and block sensitive documents, including schematics and drawings. Lately, they have identified that when these documents are blocked, certain employees may be taking screenshots and uploading them. They want to block any screenshots from being uploaded.
Which feature would you use to satisfy this requirement?
- A. optical character recognition (OCR)
- B. exact data match (EDM)
- C. ML image classifier
- D. document fingerprinting
Answer: C
Explanation:
Explanation
To block any screenshots from being uploaded, the engineering firm should use the ML image classifier feature of Netskope DLP. This feature uses machine learning to detect sensitive information within images, such as screenshots, whiteboards, passports, driver's licenses, etc. The firm can create a DLP policy that blocks any image upload that matches the screenshot classifier. This will prevent employees from circumventing the DLP controls by taking screenshots of sensitive documents. References: Improved DLP Image Classifiers, Netskope Data Loss Prevention, The Importance of a Machine Learning-Based Source Code Classifier
NEW QUESTION # 36
You are integrating Netskope tenant administration with an external identity provider. You need to implement role-based access control. Which two statements are true about this scenario? (Choose two.)
- A. The roles you want to assign must be present in the Netskope tenant.
- B. You do not need to define the administrators locally in the Netskope tenant after It Is integrated with IdP.
- C. Once integrated withIdP. you must append the "locallogin" URL to log in using IdP
- D. You need to define the administrators locally in the Netskope tenant.
Answer: A,D
Explanation:
Explanation
To implement role-based access control when integrating Netskope tenant administration with an external identity provider (IdP), two statements that are true about this scenario are A. The roles you want to assign must be present in the Netskope tenant and C. You need to define the administrators locally in the Netskope tenant. Role-based access control (RBAC) is a feature that allows you to assign different levels of permissions and access to the Netskope tenant based on the user's role. You can use RBAC to integrate Netskope tenant administration with an external IdP such as Azure AD or Okta and delegate administrative tasks to different users or groups1. To do this, you need to ensure that the roles you want to assign are present in the Netskope tenant. You can use the predefined roles such as SYSADMIN, AUDITOR, or OPERATOR, or create custom roles with specific privileges2. You also need to define the administrators locally in the Netskope tenant by creating local user accounts and assigning them roles. You can use the same email address as the IdP user account for the local useraccount3. Therefore, options A and C are correct and the other options are incorrect. References: Role-Based Access Control - Netskope Knowledge Portal, Roles - Netskope Knowledge Portal, Integrate with Azure AD - Netskope Knowledge Portal
NEW QUESTION # 37
Your customer is concerned aboutmalware in their AWS S3 buckets. What two actions would help with this scenario? (Choose two.)
- A. Create a threatprofile to quarantine malware in their AWS S3 buckets.
- B. Create a real-time policy to block malware uploads to their AWS instances.
- C. Enable Threat Protection (Malware Scan) for all of their AWS instances to Identify malware.
- D. Create an API protection policy to quarantine malware in their AWS S3 buckets.
Answer: C,D
Explanation:
Explanation
To help the customer with the scenario of malware in their AWS S3 buckets, two actions that would help are B: Enable Threat Protection (Malware Scan) for all of their AWS instances to identify malware and C. Create an API protection policy to quarantine malware in their AWS S3 buckets. Threat Protection (Malware Scan) is a feature that allows you to scan files in your cloud services, such as AWS S3, for malware using Netskope's advanced threat protection engine. You can enable Threat Protection (Malware Scan) for all of your AWS instances in the Netskope tenant by going to Settings > Cloud Services > AWS > Threat Protection and selecting the Enable Malware Scan option1. This will help you identify malware in your AWS S3 buckets and generate alerts for further action. An API protection policy is a rule that specifies the actions and notifications that Netskope applies to the data that is already resident in your cloud services, such as AWS S3, based on various criteria. You can create an API protection policy to quarantine malware in your AWS S3 buckets by going to Policies > API Protection > New Policy and selecting the AWS service, the Malware Scan data identifier, and the Quarantine action in the policy page2. This will help you isolate malware in your AWS S3 buckets and prevent it from spreading or being accessed by unauthorized users. Therefore, options B and C are correct andthe other options are incorrect. References: Threat Protection (Malware Scan) - Netskope Knowledge Portal, Add a Policy for API Protection - Netskope Knowledge Portal
NEW QUESTION # 38
You are comparing the behavior of Netskope's Real-time Protection policies to API Data Protection policies.
In this Instance, which statement is correct?
- A. All real-time policies are enforced, regardless of sequential order, while API policies are analyzed sequentially from top to bottom and stop once a policy Is matched.
- B. All API policies are enforced, regardless of sequential order, while real-time policies are analyzed sequentially from top to bottom and stop once a policy Is matched.
- C. Both real-time and API policies are all enforced, regardless of sequential order.
- D. Both real-time and API policies are analyzed sequentially from top to bottom and stop once a policy Is matched.
Answer: B
Explanation:
Explanation
Netskope's Real-time Protection policies and API Data Protection policies have different ways of applying actions based on the policy order. Real-time Protection policies are analyzed sequentially from top to bottom and stop once a policy is matched. This means that only one policy action is applied per transaction. API Data Protection policies are all enforced, regardless of sequential order. This means that multiple policy actions can be applied per file or email. Therefore, the correct statement is that all API policies are enforced, regardless of sequential order, while real-time policies are analyzed sequentially from top to bottom and stop once a policy is matched. References: Real-time Protection Policies1, API Data Protection Policies2
NEW QUESTION # 39
Your customer currently only allows users to access the corporate instance of OneDrive using SSO with the Netskope client. The users are not permitted to take their laptops when vacationing, but sometimes they must have access to documents on OneDrive when there is an urgent request. The customer wants to allow employees to remotely access OneDrive from unmanaged devices while enforcing DLP controls to prohibit downloading sensitive files to unmanaged devices.
Which steering method would satisfy the requirements for this scenario?
- A. Use a forward proxy integrated with their SSO.
- B. Use a secure forwarder integrated with an on-premises proxy.
- C. Use proxy chaining with their cloud service providers integrated with their SSO.
- D. Use a reverse proxy integrated with their SSO.
Answer: D
Explanation:
Explanation
A reverse proxy integrated with their SSO would satisfy the requirements for this scenario. A reverse proxy intercepts requests from users to cloud apps and applies policies based on user identity, device posture, app, and data context. It can enforce DLP controls to prohibit downloading sensitive files to unmanaged devices. It can also integrate with the customer's SSO provider to authenticate users and allow access only to the corporate instance of OneDrive.The other steering methods are not suitable for this scenario because they either require the Netskope client or do not provide granular control over cloud app activities.
NEW QUESTION # 40
To which three event types does Netskope's REST API v2 provide access? (Choose three.)
- A. user
- B. application
- C. infrastructure
- D. alert
- E. client
Answer: B,C,D
Explanation:
Explanation
Netskope's REST API v2 provides access to various event types via URI paths. The event types include application, alert, infrastructure, audit, incident, network, and page. These event types can be used to retrieve data from Netskope's cloud security platform. The event types client and user are not supported by the REST API v2. References: REST API v2 Overview, Cribl Netskope Events and Alerts Integration, REST API Events and Alerts Response Descriptions
NEW QUESTION # 41
You have deployed Netskope Secure Web Gateway (SWG). Users are accessing new URLs that need to be allowed on a daily basis. As an SWG administrator, you are spending a lot of time updating Web policies. You want to automate this process without having to log into the Netskope tenant Which solution would accomplish this task?
- A. You can minimize your work by sharing URLs with Netskope support.
- B. You can use Cloud Risk Exchange.
- C. You can use REST API to update the URL list.
- D. You can use Cloud Log Shipper.
Answer: C
Explanation:
Explanation
To automate the process of updating Web policies without having to log into the Netskope tenant, you can use REST API to update the URL list. REST API is a feature that allows you to use an auth token to make authorized calls to the Netskope API and access resources via URI paths1. You can use REST API to update a URL list with new values by providing the name of an existing URL list and a comma-separated list of URLs or IP addresses2. This can help you automate or script the management of your URL lists and keep them up-to-date. Therefore, option D is correct and the other options are incorrect. References: REST API v2 Overview - Netskope Knowledge Portal, Update a URL List - Netskope Knowledge Portal
NEW QUESTION # 42
You want to secure Microsoft Exchange and Gmail SMTP traffic for DLP using Netskope. Which statement is true about this scenario when using the Netskope client?
- A. Netskope can inspect inbound and outbound SMTP traffic for Microsoft Exchange and Gmail.
- B. Enable Cloud Firewall to Inspect Inbound SMTP traffic for Microsoft Exchange and Gmail.
- C. Enable REST API v2 to Inspect inbound SMTP traffic for Microsoft Exchange and Gmail.
- D. Netskope can inspect outbound SMTP trafficfor Microsoft Exchange and Gmail.
Answer: D
Explanation:
Explanation
Netskope can inspect outbound SMTP traffic for Microsoft Exchange and Gmail using the Netskope client.
The Netskope client intercepts the SMTP traffic from the user's device and forwards it to the Netskope cloud for DLP scanning. The Netskope client does not inspect inbound SMTP traffic, as this is handled by the cloud email service or the MTA. Therefore, option A is correct and the other options are incorrect. References: Configure Netskope SMTP Proxy with Microsoft O365 Exchange, Configure Netskope SMTP Proxy with Gmail, SMTP DLP, Best Practices for Email Security with SMTP proxy
NEW QUESTION # 43
Netskope is being used as a secure Web gateway. Your organization's URL list changes frequently. In this scenario, what makes It possible for a mass update of the URL list in the Netskope platform?
- A. SCIM provisioning
- B. Assertion Consumer Service URL
- C. Cloud Threat Exchange
- D. REST API v2
Answer: D
Explanation:
Explanation
The method that makes it possible for a mass update of the URL list in the Netskope platform is A. REST API v2. REST API v2 is a feature that allows you to use an auth token to make authorized calls to the Netskope API and access resources via URI paths5. You can use REST API v2 to update a URL list with new values by providing the name of an existing URL list and a comma-separated list of URLs or IP addresses6. This can help you automate or script the management of your URL lists and keep them up-to-date. Therefore, option A is correct and the other options are incorrect. References: REST API v2 Overview - Netskope Knowledge Portal, Update a URL List - Netskope Knowledge Portal
NEW QUESTION # 44
Your customer has some managed Windows-based endpoints where they cannot add any clients or agents. For their users to have secure access to their SaaS application, you suggest that the customer use Netskope's Explicit Proxy.
Which two configurations are supported for this use case? (Choose two.)
- A. Endpoints must be configured in the device section of the tenant to interoperate with all proxies.
- B. Endpoints can be configured to directly use the Netskope proxy.
- C. Endpoints can be configured to use a Proxy Auto Configuration (PAC) file.
- D. Endpoints must have separate steering configurations in the tenant settings.
Answer: B,C
Explanation:
Explanation
For the use case of managed Windows-based endpoints where no clients or agents can be added, you can suggest that the customer use Netskope's Explicit Proxy. Explicit Proxy is a method for steering traffic from any device to the Netskope Cloud using a proxy server. There are two supported configurations for this use case: Endpoints can be configured to directly use the Netskope proxy by setting the proxy settings in the browser or the operating system to point to the explicit proxy destination provided by Netskope. Endpoints can be configured to use a Proxy Auto Configuration (PAC) file by downloading a PAC file template from Netskope and modifying it according to the customer's needs. The PAC file can be hosted on-premises or on the cloud and distributed to the endpoints. The other options are not valid for this use case. Endpoints do not need separate steering configurations in the tenant settings, as they can use the same explicit proxy destination and port. Endpoints do not need to be configured in the device section of the tenant to interoperate with all proxies, as this is only required for reverse proxy mode. References: Explicit Proxy3, [Explicit Proxy over IPSec and GRE Tunnels]
NEW QUESTION # 45
You are provisioning Netskope users from Okta with SCIM Provisioning, and users are not showing up in the tenant. In this scenario, which two Netskope components should you verify first In Okta for accuracy?
(Choose two.)
- A. SCIM server URL
- B. IdP Entity ID
- C. OAuth token
- D. Netskope SAML certificate
Answer: A,C
Explanation:
Explanation
To provision Netskope users from Okta with SCIM Provisioning, and users are not showing up in the tenant, the two Netskope components that you should verify first in Okta for accuracy are B. OAuth token and D.
SCIM server URL. The OAuth token is a credential that allows Okta to authenticate with the Netskope SCIM server and perform user provisioning operations4. The SCIM server URL is the endpoint that Okta uses to communicate with the Netskope SCIM server and send user data5. Both of these components must be configured correctly in Okta for the SCIM Provisioning to work. You can find them in the Netskope UI under Settings > Tools > Directory Tools > SCIM Integration6. Therefore, options B and D are correct and the other options are incorrect. References: SCIM-Based User Provisioning - Netskope Knowledge Portal, Netskope + Okta Use Case: Provisioning Users and Managing Groups Using SCIM - Netskope, Netskope Partner Okta - Netskope
NEW QUESTION # 46
Your learn is asked to Investigate which of the Netskope DLP policies are creating the most incidents. In this scenario, which two statements are true? (Choose two.)
- A. You can see the top Ave DLP policies triggered using the Analyze feature
- B. You can create a report using Reporting or Advanced Analytics.
- C. The Skope IT Applications tab will list the top five DLP policies.
- D. The Skope IT Alerts tab will list the top five DLP policies.
Answer: A,B
Explanation:
Explanation
To investigate which of the Netskope DLP policies are creating the most incidents, the following two statements are true:
You can see the top five DLP policies triggered using the Analyze feature. The Analyze feature allows you to create custom dashboards and widgets to visualize and explore your data. You can use the DLP Policy widget to see the top five DLP policies that generated the most incidents in a given time period3.
You can create a report using Reporting or Advanced Analytics. The Reporting feature allows you to create scheduled or ad-hoc reports based on predefined templates or custom queries. You can use the DLP Incidents by Policy template to generate a report that shows the number of incidents per DLP policy4. TheAdvanced Analytics feature allows you to run SQL queries on your data and export the results as CSV or JSON files. You can use the DLP_INCIDENTS table to query the data by policy name and incident count5.
The other two statements are not true because:
The Skope IT Applications tab will not list the top five DLP policies. The Skope IT Applications tab shows the cloud app usage and risk summary for your organization. It does not show any information about DLP policies or incidents6.
The Skope IT Alerts tab will not list the top five DLP policies. The Skope IT Alerts tab shows the alerts generated by various policies and profiles, such as DLP, threat protection, IPS, etc. It does not show the number of incidents per policy, only the number of alerts per incident7.
NEW QUESTION # 47
......
Valid NSK200 Dumps for Helping Passing Netskope Exam: https://www.troytecdumps.com/NSK200-troytec-exam-dumps.html
Practice Exam NSK200 Realistic Dumps Verified Questions: https://drive.google.com/open?id=1iEuDfmHcnNnHGHivwLlf-T2FLqP6TMxR