New DES-DD23 Test Materials & Valid DES-DD23 Test Engine [Q18-Q40]

Share

New DES-DD23 Test Materials & Valid DES-DD23 Test Engine

DES-DD23 Updated Exam Dumps [2022] Practice Valid Exam Dumps Question

NEW QUESTION 18
When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?

  • A. CIFSTimeout to 3600 seconds
  • B. SESSTIMEOUT to 7200 seconds
  • C. SMBTimeout to 7200 seconds
  • D. SESSTIMEOUT to 3600 seconds

Answer: D

 

NEW QUESTION 19
What is the maximum capacity for a DDVE?

  • A. 64 TB
  • B. 256 TB
  • C. 96 TB
  • D. 128 TB

Answer: B

 

NEW QUESTION 20
What are the steps to configure the Retention Lock Compliance?

Answer:

Explanation:

Reference:
https://datastorageasean.com/sites/default/files/EMC-data-domain-retention-lock-wp.pdf

 

NEW QUESTION 21
A backup administrator needs to implement BoostFS for Windows. What do they need to install on the Windows server?

  • A. CBFS
  • B. CIFS
  • C. NFS
  • D. FUSE

Answer: B

 

NEW QUESTION 22
An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit. What is the required amount of metadata storage (TB)?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

 

NEW QUESTION 23
Which command is used to check if NFS is enabled?

  • A. nfs show clients
  • B. system show
  • C. nfs status
  • D. nfs enable

Answer: A

 

NEW QUESTION 24
What is the correct sequence of steps to configure storage for Dell EMC Cloud Tier in the DD System Manager?

Answer:

Explanation:

 

NEW QUESTION 25
What rule must be followed during an upgrade procedure with the FS25 expansion shelf?

  • A. If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five
  • B. FS25 shelf must be on the same chain with DS60
  • C. For high performance, the connections from a controller to FS25 shelves must be over FC cables
  • D. FS25 shelf is cabled on a separate private chain

Answer: D

Explanation:
Reference: https://www.dell.com/support/kbdoc/en-pk/000082030/71624-memory-requirements-Product Questions: Version: and-storage
https://www.dell.com/support/kbdoc/en-pk/000082030/71624-memory-requirements-Product Questions: Version: and-storage- configurations

 

NEW QUESTION 26
What is the preferred method to ensure backups are protected against deletion or corrupt?

  • A. Retention Lock
  • B. Data Invulnerability Architecture
  • C. Dell EMC Cloud Tier
  • D. Encryption

Answer: B

 

NEW QUESTION 27
What is the correct sequence of operations used by the PowerProtect DD DIA in the end-to-end verification process?

Answer:

Explanation:

Reference:
https://www.dell.com/community/Data-Domain/Introducing-data-protection-technology-DIA-of-Data-Domain/td- p/6960086

 

NEW QUESTION 28
Refer to the exhibit.

Match each action to its call-out location.

Answer:

Explanation:

 

NEW QUESTION 29
The finance department requires PDFs older than 90 days to be archived through Cloud Tier into Azure Blob Storage. They want any PDFs older than 180 days archived into AWS S3.
Which data movement policy is used to archive files into Azure Blob Storage?

  • A. Age-based
  • B. Age-range
  • C. Recall
  • D. App-driven

Answer: A

 

NEW QUESTION 30
When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?

  • A. Offsite
  • B. Archived
  • C. Offline
  • D. Vaulted

Answer: D

 

NEW QUESTION 31
An administrator is configuring a Google Cloud Provider cloud unit on their DD9900. Which certificate must be imported before adding the cloud unit?

  • A. S3 Flexible
  • B. Root CA
  • C. GlobalSign Root R2
  • D. GlobalSign Root R1

Answer: C

 

NEW QUESTION 32
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900. Which compression algorithm will they see enabled by default?

  • A. lz
  • B. gzfast
  • C. lzw
  • D. gz

Answer: B

 

NEW QUESTION 33
An administrator has retained snapshots for a single MTree and is trying to create a new one. An error message is received.
What is the reason for the failure?

  • A. There are not enough snapshot licenses
  • B. The DDOS needs to be upgraded
  • C. The user does not have the permission to retain more snapshots
  • D. The maximum number of snapshots has been exceeded

Answer: D

 

NEW QUESTION 34
An administrator monitors the performance statistics of a PowerProtect DD appliance. Low disk-write rates are shown, and the network inbound traffic is high.
What is the most likely cause of this behavior?

  • A. Known segments
  • B. Disk failure
  • C. Expired segments
  • D. NVRAM failure

Answer: A

 

NEW QUESTION 35
A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.
What is causing these drives to be inaccessible?

  • A. A second SAS connection from DD9400 to DS60 is not activated.
  • B. The capacity license applied is only for 30 drives.
  • C. There are not enough spare drives.
  • D. There are not enough cache drives on the DD9400 to support the extra capacity.

Answer: A

 

NEW QUESTION 36
What can be used to monitor system utilization?

  • A. Alert Messages
  • B. Health tab in the System Manager GUI
  • C. system show performance command
  • D. system status command

Answer: A

 

NEW QUESTION 37
Which port/protocol is used when using a syslog server to monitor a PowerProtect DD system?

  • A. 514/TCP
  • B. 2051/TCP
  • C. 514/UDP
  • D. 2051/UDP

Answer: C

 

NEW QUESTION 38
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?

  • A. SSL
  • B. HTTPS
  • C. FTP
  • D. SSH

Answer: B

 

NEW QUESTION 39
A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack. When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?

  • A. Expansion port of the controller
  • B. Expansion port of the upstream shelf
  • C. Host port of the controller
  • D. Host port of the downstream shelf

Answer: B

 

NEW QUESTION 40
......


EMC DES-DD23 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Monitor PowerProtect DD capacity and estimate storage burn rate
  • Implement Dell EMC PowerProtect DD system with key protocols, including NFS/CIFS, DD Boost, VTL, and NDMP
Topic 2
  • Verify hardware and analyze and interpret space utilization and compression graphs
  • Distinguish between key backup software components
Topic 3
  • Install and configure Dell EMC PowerProtect DD systems with Dell EMC Cloud Tier, including system racking and cabling
  • Monitor system activity and performance and evaluate the cleaning frequency
Topic 4
  • Describe how to prepare the Dell EMC PowerProtect DD system for installation, including rail and rack the system hardware, and connect and cable the system to external storage
Topic 5
  • Configure the network for administrative access, and verify interoperability with connected devices
  • Cloud Tier Implementation and Administration
Topic 6
  • Implement and validate the PowerProtect DD system as a VTL
  • Identify typical Dell EMC PowerProtect DD backup and recovery solutions and describe PowerProtect DD product positioning
Topic 7
  • Describe how to perform the initial configurations of the Dell EMC PowerProtect DD system
  • Describe Dell EMC Cloud Tier features, benefits, architecture and use cases

 

DES-DD23 Sample with Accurate & Updated Questions: https://www.troytecdumps.com/DES-DD23-troytec-exam-dumps.html

DES-DD23 Exam Info and Free Practice Test | TroytecDumps: https://drive.google.com/open?id=1R4buTdeV99QjBeq41fnA0Bkh8Te5naZF