[Nov 14, 2021] 300-430 PDF Recently Updated Questions Dumps to Improve Exam Score
300-430 Dumps Full Questions with Free PDF Questions to Pass
What is the duration, language, and format of Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
- Duration of Exam: 90 minutes
- Format: Multiple choice
- Language of Exam: English
- Validity: 3 years
Who should take the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
People who wish to explore the power of the dynamic culture of the Cisco Learning Network to jump-start their certification and lifelong learning goals should take this exam. Those who want to get useful tools for IT training for all Cisco certifications should also get this certification. People with prior knowledge of integrating wireless networks, and complete understanding of their implementation, from the service provider are highly recommended to take this exam and get themselves certified from Cisco.
List of the target audience for this exam:
- Network Operations Center (NOC) personnel
- Network architects
- Network supervisors
- Network engineers
- Channel partners
- Network designers
- Network managers
- Network administrators
NEW QUESTION 34
What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?
- A. EAP-FAST with CAPWAP DTLS
- B. EAP-FAST with CAPWAP DTLS + port authentication
- C. EAP-PEAP with 802.1x port authentication
- D. EAP-TLS with 802.1x port authentication
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/1612/configguide/ewc_cg_16_12/802_1x_suppor
NEW QUESTION 35 
Refer to the exhibit. The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
- A. The Cisco CMX server receives NetFlow data from the WLC.
- B. The Cisco CMX server receives NMSP traffic from the WLC.
- C. The Cisco CMX server receives SNMP traffic from the WLC.
- D. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
Answer: D
NEW QUESTION 36
Refer to the exhibit.
An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure a policy on ISE to allow devices to connect that validate the certificate.
- B. Configure the certificate, WLAN, and radio interface on WGB.
- C. Configure the certificate on the WLC.
- D. Configure WGB as a network device in ISE.
- E. Configure WLAN to authenticate using ISE.
- F. Configure the access point with the root certificate from ISE.
Answer: A,B,E
NEW QUESTION 37
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP + 802.1X
- B. WPA+WPA2
- C. 802.1X
- D. CKIP
- E. Static WEP
Answer: B,E
Explanation:
NEW QUESTION 38
Refer to the exhibit.
Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)
- A. APSD
- B. WMM
- C. TSPEC
- D. SIFS
- E. 802.11e
Answer: B,E
NEW QUESTION 39
When using a Cisco Catalyst 9800 Series Wireless Controller, which statement about AutoQoS is true?
- A. It automates deployment of wired QoS and makes wireless QoS implementation easier
- B. It has a set of predefined profiles that you cannot modify further
- C. It matches traffic and assigns each matched packet to QoS groups
- D. It allows the output policy map to put specific QoS queues into specific subgroups
Answer: C
Explanation:
NEW QUESTION 40
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Change the WLAN reserved bandwidth for WebEx
- B. Change the AVC application WebEx-app-sharing to mark
- C. Create an AVC profile for WebEx
- D. Create an ACL for WebEx
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html
NEW QUESTION 41
Which three characteristics of a rogue AP pose a high security risk? (Choose three.)
- A. accepts clients
- B. high RSSI
- C. open authentication
- D. low RSSI
- E. foreign SSID
- F. distant location
Answer: A,C,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/74/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010111001.html
NEW QUESTION 42
What are two considerations when deploying a Cisco Hyperlocation? (Choose two.)
- A. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.
- B. After enabling Cisco Hyperlocation on Cisco CMX. the APs and the wireless LAN controller must be restarted.
- C. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.
- D. NTP configuration is available, but not recommended.
- E. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
Answer: A,C
NEW QUESTION 43
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
- B. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
- C. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
- D. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
Answer: D
Explanation:
NEW QUESTION 44
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConnect mode with OfficeExtend enabled
- B. FlexConnect mode with local authentication
- C. FlexConned mode with central switching enabled
- D. FlexConnect mode with central authentication
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12
NEW QUESTION 45
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The user is using invalid credentials.
- B. The Cisco WLC is configured for the incorrect date.
- C. The client is falling to accept certificate.
Answer: C
NEW QUESTION 46
Which devices can be tracked with the Cisco Context Aware Services?
- A. wired devices
- B. wired and wireless devices
- C. Cisco certified wireless devices
- D. wireless devices
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/context-aware-software/110836-cas-faq.html
NEW QUESTION 47
During the EAP process and specifically related to the client authentication session, which encrypted key is sent from the RADIUS server to the access point?
- A. session key
- B. shared-secret key
- C. encryption key
- D. WPA key
Answer: A
Explanation:
NEW QUESTION 48
When using a Cisco Catalyst 9800 Series Wireless Controller, which statement about AutoQoS is true?
- A. It automates deployment of wired QoS and makes wireless QoS implementation easier
- B. It has a set of predefined profiles that you cannot modify further
- C. It matches traffic and assigns each matched packet to QoS groups
- D. It allows the output policy map to put specific QoS queues into specific subgroups
Answer: C
Explanation:
NEW QUESTION 49
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP + 802.1X
- B. WPA+WPA2
- C. 802.1X
- D. CKIP
- E. Static WEP
Answer: B,E
Explanation:
NEW QUESTION 50
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Change the WLAN reserved bandwidth for WebEx
- B. Change the AVC application WebEx-app-sharing to mark
- C. Create an AVC profile for WebEx
- D. Create an ACL for WebEx
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html
NEW QUESTION 51
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Trust DSCP
- B. Set QoS to Platinum
- C. Allow WMM
- D. Enable CAC
Answer: A
Explanation:
NEW QUESTION 52
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?
- A. Policy Profile
- B. RF Profile
- C. AP Join Profile
- D. Flex Profile
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/configguide/b_wl_16_10_cg/flexconnect.html
NEW QUESTION 53
When implementing self-registration for guest/BYOD devices, what happens when an employee tries to connect four devices to the network at the same time?
- A. The last device is removed and the newly added device is updated as active device.
- B. The registration is allowed, but only one device is connected at any given time.
- C. Purge time dictates how long a device is registered to the portal.
- D. All devices are allowed on the network simultaneously.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Desig
NEW QUESTION 54 
Refer to the exhibit. Which COS to DSCP map must be modified to ensure that voice traffic is tagged correctly as it traverses the network?
- A. COS of 6 to DSCP 46
- B. COS of 5 to DSCP 46
- C. COS of 7 to DSCP 48
- D. COS of 3 to DSCP 26
Answer: B
NEW QUESTION 55
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
- A. multicast AP multicast mode
- B. broadcast forwarding
- C. controller IGMP snooping
- D. unicast AP multicast mode
Answer: A
NEW QUESTION 56
......
100% Updated Cisco 300-430 Enterprise PDF Dumps: https://www.troytecdumps.com/300-430-troytec-exam-dumps.html
Free CCNP Enterprise 300-430 Official Cert Guide PDF Download: https://drive.google.com/open?id=1Fb9cNtwZb3q74jFsUDo1s5y5GgQcmegk