[Nov 22, 2024] C_BW4H_2404 Dumps PDF and Test Engine Exam Questions - TroytecDumps
Verified C_BW4H_2404 exam dumps Q&As with Correct 88 Questions and Answers
NEW QUESTION # 31
You want to build an SAP HANA HDI calculation view of data category CUBE, but you get the "no measure defined" error. For the business requirement, a measure does not make sense. Besides changing the data category to DIMENSION, what do you have to do?
- A. Switch from an aggregation node to a projection node
- B. Switch form a projection node to an aggregation node
- C. Switch from a projection node to a star join node
- D. Switch from an aggregation node to a star join node
Answer: A
NEW QUESTION # 32
In SAP Web IDE for SAP HANA you have imported a project including an HDB module with calculation views. What do you need to do in the project settings before you can successfully build the HDB module?
- A. Change the schema name
- B. Assign a space.
- C. Define a package.
- D. Generate the HDI container.
Answer: B
NEW QUESTION # 33
The Database Explorer in the Web IDE for SAP HANA proveides a data file improt wizard to create a table in SAP HANA from a flat file. What are possible actions adter the system suggests the target structure?? Note: There are 3 correct answers to this question.
- A. Change the order of the fields in the target table
- B. Define sorting properties for a target table field
- C. Switch the table type between row store and column store
- D. Adjust the suggested data type of the target table fileds
- E. Map InfoObjetcs to fields in the target tavle
Answer: A,C,D
NEW QUESTION # 34
What is the maximum number of characteristics that can be used for a multi-dimensional exception aggregation in a BW query?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 35
What is required before you can integrate an HDI Calculation View (data category Dimension) into another HDI Calculation View (data category Cube with Star Join) of the same HDI container?"
- A. Create a synonym for the HDI Calculation View (data category Dimension).
- B. Build the runtime object of the HDI Calculation View (data category Cube with Star Join) to generate a design time file.
- C. Build the design time file of the HDI Calculation View (data category Dimension) to generate a runtime object.
- D. Create a synonym for the HDI Calculation View (data category with Star Join).
Answer: C
NEW QUESTION # 36
You consider using the feature Snapshot Support for a Stard DataStore object. Which data management process may be slower with this feature than without it?
- A. Delete request from the inbound table
- B. Filling the Inbound Table
- C. Selective Data Deletion
- D. Activating Data
Answer: B
NEW QUESTION # 37
Which recommendations should you follow to optimize BW query performance? Note: There are 3 correct answers to this question
- A. Use fewer drill-down characteristics in the initial view
- B. Use exclude functions in the restricted key figures
- C. Use include functions in the restricted key figures.
- D. Use mandatory characteristic value variables
- E. Use characteristic filters that overlap
Answer: A,C,D
Explanation:
* A. Use fewer drill-down characteristics in the initial view: This can improve the query performance by reducing the amount of data that needs to be transferred and displayed at the start of the query execution. The user can drill down to more details later if needed1.
* D. Use mandatory characteristic value variables: This can improve the query performance by restricting the data selection to a smaller set of values that are relevant for the user. The user can also change the variable values later if needed1.
* E. Use include functions in the restricted key figures: This can improve the query performance by avoiding unnecessary calculations and aggregations that are done when using exclude functions.
Include functions are also more efficient than selections or restricted key figures when filtering data1.
Reference:
* 2 https://blogs.sap.com/2015/04/20/query-performance-optimisation-tips-in-bw-73/
* 1 https://blogs.sap.com/2022/02/02/query-performance-optimization-in-bw-few-tips/
* 3 https://help.sap.com/doc/00f68c2e08b941f081002fd3691d86a7/2022.12/en- us/0471d0ecea4e4677ba29d9ac1496c24c.html
* 4 https://blogs.sap.com/2021/06/02/sap-bw-4hana-performance-optimization-part-i/
NEW QUESTION # 38
Which features of an SAP BW/4HANA InfoObjet are intended to reduce the physical data volume? Note; There are 2 correct answers to this question.
- A. Reference charateristic
- B. Compounding charateristic
- C. Transitive attribute
- D. Enhanced master data update
Answer: A,C
NEW QUESTION # 39
For a BW query, you want to have the first month of the current quarter as a default value for an input-ready BW variable for the characteristic OCALMONTH. Which processing tyoe do you use?
- A. Customer Exit
- B. Manuel Input with default value
- C. Replacement Path
- D. Manual Input with offset value
Answer: A
NEW QUESTION # 40
For which use case would you need to model a transitive attribute?
- A. Load attributes using the enhanced master data update
- B. Report on navigational attributes of navigational attributes
- C. Generate a transient provider for a BW query on master data attributes
- D. Store time-dependent snapshots of master data attributes
Answer: B
NEW QUESTION # 41
What are the reasons for implementing Composite Providers? Note: There are 2 correct answers to this question.
- A. To persist combined data for reporting
- B. To provide an interface for using BW queries
- C. To directly expose an SAP HANA table from an external schema
- D. To provide a virtual data mart layer that combines existing BW models
Answer: B,D
NEW QUESTION # 42
Where can you use an authorization variable? Note: There are 2 correct answers to this question.
- A. In the definition of a query filter
- B. In the definition of a restricted key figure
- C. In the definition of a calculated key figure
- D. In the definition of a characteristic value variable
Answer: A,D
NEW QUESTION # 43
The Database Explorer in the Web IDE for SAP HANA proveides a data file improt wizard to create a table in SAP HANA from a flat file.
What are possible actions adter the system suggests the target structure?? Note: There are 3 correct answers to this question.
- A. Change the order of the fields in the target table
- B. Define sorting properties for a target table field
- C. Switch the table type between row store and column store
- D. Adjust the suggested data type of the target table fileds
- E. Map InfoObjetcs to fields in the target tavle
Answer: A,C,D
NEW QUESTION # 44
SAP provides three data warehouse solutions to provide customers more flexibility.
How is SAP Data Warehouse Cloud positioned?
- A. To empower business users to generate SQL code that ispushed to SAP BW/4HANA
- B. To support business user who want to simplify theris own ABAP routines
- C. To support business user with a new self-service tool to model their own data flows
- D. To empower business users to create an dmaintain process chain from SAP BW/4HANA dataflows
Answer: C
NEW QUESTION # 45
Which types of values can be protected by analysis authorizations? Note: There are 2 correct answers to this question.
- A. Display attribute values
- B. Key figure values
- C. Hierarchy node values
- D. Characteristic values
Answer: B,C
NEW QUESTION # 46
Which SAP solutions can leverage the Write Interface for DataStore objects (advanced) to push data into the inbound table of DataStore objects (advanced)? Note: There are 2 correct answers to this question.
- A. SAP Data Services
- B. SAP Lscape Transformation Replication Server
- C. SAP Datasphere
- D. SAP Process Integration
Answer: A,B
NEW QUESTION # 47
Which modeling decisions may have side effects on runtime performance? Note: There are 3 correct answers to this question.
- A. Use a transitive attribute instead of an attribute that is directly assigned to a characteristic.
- B. Include a characteristic from the underlying DataMart DataStore Object in the CompositeProvider instead of a navigation attribute.
- C. Move a characteristic within a DataMart DataStore object to a different group.
- D. Uncheck the "Write change log" property for a Stard DataStore Object.
- E. Change a time-independent attribute of a characteristic to a time-dependent attribute.
Answer: B,C,D
NEW QUESTION # 48
In an SAP HANA HDI Calculation View, you need to combine attributes data (left table) and the data's language-dependent text (right table) using a text join. What should you select to restrict the result set to the logon language?
- A. the language column in the right table
- B. The logon language in the left table
- C. The join cardinality between both tables
- D. the language column in the left table
Answer: A
NEW QUESTION # 49
Which features does SAP Analysis for Microsoft Office provide? Note: There are 3 correct answers to this question.
- A. Displaying data simultaneously in a table and a chart
- B. Creating bookmarks for a navigation state
- C. Changing context menu entries
- D. Including more than one data source
- E. Dragging measures in and out of the report
Answer: A,D,E
NEW QUESTION # 50
Which tasks are part of the Business Blueprint and Data Model Definition phase in an SAP BW/4HANA project? Note: There are 3 correct answers to this question.
- A. Check the availability of data
- B. Design the data layer concept
- C. Implement transport routes and layers
- D. Specify necessary data conversion
- E. Monitor batch jobs and data volume
Answer: A,B,D
NEW QUESTION # 51
......
SAP C_BW4H_2404 Test Engine PDF - All Free Dumps: https://www.troytecdumps.com/C_BW4H_2404-troytec-exam-dumps.html
Get New C_BW4H_2404 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1Sb-sLaYCzC6TvIu3ZodmyTf-3VJrW-JC