OmniStudio-Developer Practice Exam Tests Latest Updated on Sep-2021
Pass OmniStudio-Developer Exam in First Attempt Guaranteed Dumps!
NEW QUESTION 26
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label.
What could cause this?
- A. The card state only supports a limited number of fields for display.
- B. There are no Test Data Test Parameters configured.
- C. The field is null in the Salesforce record.
- D. In the Setup Panel, {recordid} is misspelled in the Data Source Input Map.
Answer: C
NEW QUESTION 27
A developer needs to retrieve data from an external system that stores policy dat a. The external system supports REST APIs to access and update the policies. Due to the volume of the policy data and peak hours of hours of business, calls to the REST APIs sometimes take longer than expected to response.
The developer creates an Integration Procedure to retrieve the policy data for use in an OmniScript.
Given the external system's knows performance issues, which configuration should be used to implement the call to the external system?
Choose 2 answers
- A. Check the Chainable checkbox on the integration procedure Action in the OmniScript
- B. Configure a Remote action with timeout settings of 120000
- C. Check the Chain on Step Check on the HTTP Action in the Integration Procedure
- D. Set the Timeout property on the HTTP Action in the Integration Procedure
Answer: B,C
NEW QUESTION 28
Refer to the exhibit below. What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action's HTTP URL?
- A. ((DRRCase, CaseNumber))
- B. MTTOPDetCaseDetail: CaseNumber%
- C. %DRReadCase: CaseNumber%
- D. ((CaseNumber))
Answer: C
NEW QUESTION 29
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Deactivate the contextId key/value pair
- B. Add a Show/Hide condition on the Set Values element.
- C. Update the ContextId value to specify an id from the Production org.
- D. Delete or Deactivate the Set Values element.
Answer: B
NEW QUESTION 30
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscriptis used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. The LWC PubSub Message flag in the Set Values action of theparent has not been set.
- B. The flag passDataJSON in the parent OmniScript in not configured correctly.
- C. Both parent and embedded OmniScripts have the same element name for the Set values element.
- D. A developer failed to include a Navigation Element to pass data from the parent OmniScript.
Answer: A
NEW QUESTION 31
How can a Card Layout be embedded within another Card?
- A. Use a card state with a Layout condition
- B. Use a session variable on a Card
- C. Use an angular filter in a specific field in a card state
- D. Use the Add Layout button in zone layout
Answer: D
NEW QUESTION 32
What is the reason for this? Refer to the exhibit below.
- A. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- B. The flag passData.JSON in the parent OmniScript in not configured correctly.
- C. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- D. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
Answer: D
NEW QUESTION 33
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the dat a. What error could cause this behavior?
Choose 2 answers
- A. ContextId is misspelled in the merge code that passes the Recordld to the DataRaptor
- B. In the DataRaptor Load, in the Preview tab, the Record is from the wrong record type.
- C. The input JSON paths In the DataRaptor Load do not match the JSON from the OmniScript.
- D. The fields that are not updated are read only in Salesforce.
Answer: C,D
NEW QUESTION 34
For testing an Omniscript the Contextld is the only key in a Set Values element Before going into production, what are two possible best practices for this Contextld? Choose 2 answers
- A. Delete the Set Values element.
- B. Add the correct Contextld to the {Data} modal
- C. Do nothing. It will be ignored at runtime.
- D. Deactivate the Set Values element.
Answer: A,B
NEW QUESTION 35
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developer configure the FlexCard to display the case records in this way?
- A. Select the Repeatable Mode property on the data table elements
- B. Enable the Repeat Records feature on the FlexCard Setup tab
- C. Enable the record Looping feature on the data table elements
- D. Disable the Repeat Record feature on the FlexCard setup tab
Answer: D
NEW QUESTION 36
A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.
Which feature should the developer enable?
- A. Invoke Mode Non-Blocking
- B. Invoke Mode Fire and Forget
- C. Use Future
- D. Toast Completion
Answer: A
NEW QUESTION 37
You want a child FlexCard to use the parent's data source.
What do you need to do to make it work? Choose 2 answers
- A. The same fields must be available in both parent and child FlexCards
- B. You must select a data node in the Data Node field in the Properties panel on the parent FlexCard
- C. You must select a data node in the Data Node field in the Properties panel on the child FlexCard Pencil & Pape
- D. The same data source must be selected and configured in both parent and child FlexCards
Answer: B,C
NEW QUESTION 38
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, the developer enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?
- A. The DataRaptor Action did not have the add response Ro Response JSON property set to true.
- B. The Response cannot be previewed directly.
- C. The AccountId used for the preview is invalid.
- D. A Response Action was not added to the integration Procedure.
Answer: D
NEW QUESTION 39
When an OmniScript is launched from an Action on a FlexCard, the OmniScript displays, but no Salesforce data is populated.
What error could cause this behavior? Choose 2 answers
- A. In the DataRaptor Extract Action, the Input Parameters Data Source is misspelled.
- B. There is no active version of the OmniScript.
- C. There is no active version of the DataRaptor Extract.
- D. The Id Field for Actions in the FlexCard is not configured with the correct Recordid.
Answer: A,D
NEW QUESTION 40
The OmniScript must retrieve device details stored in the Asset object and then call an external system to send troubleshooting commands via REST API to the device.
Which two OmniScript element should the developer use to configure this functionality?
- A. SOQL Action
- B. Navigation Action
- C. HTTP Action
- D. DataRaptor Extract Action
- E. REST API Action
Answer: C,D
NEW QUESTION 41
Why would a developer clone an Integration Procedure instead of versioning it?
- A. The new Integration Procedure will be used independently
- B. The new Integration Procedure is Chainable.
- C. The new Integration Procedure uses a Cache Block.
- D. The new Integration Procedure it replacing stub data.
Answer: A
NEW QUESTION 42
In which two fields in an Integration Procedure or DataRaptor can you use a function like CONCAT or DATEDIFF? Choose 2 answers
- A. In a DataRaptor Action in an Input Parameters value field.
- B. In a DataRaptor in an Output Tab Output JSON Path.
- C. In a Remote Action in an Additional Output value field.
- D. In a Set Values Action in a Value field.
Answer: A,C
NEW QUESTION 43
You want to pass the postalcode attribute from a parent to a child FlexCard.
What do you enter for the Value on the parent FlexCard?
- A. {Parent PostalCode}
- B. {PostalCode}
- C. {Params.PostalCode}
- D. {params.postaiCode}
Answer: C
NEW QUESTION 44
You have so many fields on a FlexCard that it looks cluttered. Based on best practices, what is the most efficient way to declutter it?
- A. Use a datatable or chart element
- B. Use a child FlexCard
- C. Delete some of the actions
- D. Use a flyout action
Answer: D
NEW QUESTION 45
Refer to the exhibit below. In this integration production structure, what Send JSON Pathwould be used to send the Output of the Action1 element to a Remote Action?
- A. BlockB: BlockB. Action1
- B. Action1. BlockB. Block A
- C. Action1: BlockB. Block A
- D. BlockA: BlockB. Action 1
Answer: C
NEW QUESTION 46
Refer to the exhibit below.
What is the reason that the fields fail to display the fetched data?
- A. Lookup Mode is selected in the properties of the Type Ahead Block.
- B. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- C. Use Data JSON is Not selected in the properties of the Type Ahead Block.
- D. The typeHead key is not in the correct format.
Answer: B
NEW QUESTION 47
In an OmniScript, what is unique about a Requirement in a Messaging element? Choose 2 answers
- A. It sets the element to required
- B. It requires a Validate Expression
- C. It makes the banner yellow
- D. It is only availability for the false message
Answer: B,C
NEW QUESTION 48
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developerconfigure the FlexCard to display the case records in this way?
- A. Select the Repeatable Mode property on the data table elements
- B. Enable the Repeat Records feature on the FlexCard Setup tab
- C. Enable the record Looping feature on the data table elements
- D. Disable the Repeat Record feature on the FlexCard setup tab
Answer: D
NEW QUESTION 49
An integration Procedure uses an HTTP action to make a REST API call. The response from the REST API must be converted into a specific XML structure before sending it as an input to another external wen service.
How should the developer configure the Integration Procedure to meet this requirement?
- A. Use a Remote Action that calls the XMLStreamWriter class
- B. Use a DataRaptor Extract and check the XML checkbox on the Output JSON Path.
- C. Use a DataRaptor Transform to convert JSON to XML
- D. Use a Remote Action that calls the XMLStreamReader class
Answer: C
NEW QUESTION 50
Which twoof the items below must be defined before you can create a new OmniScript? Choose 2 answers
- A. Template
- B. SubType
- C. Type
- D. Description
Answer: B,C
NEW QUESTION 51
......
Salesforce Developer Free Certification Exam Material from TroytecDumps with 63 Questions: https://www.troytecdumps.com/OmniStudio-Developer-troytec-exam-dumps.html
OmniStudio-Developer Dumps Full Questions - Exam Study Guide: https://drive.google.com/open?id=168pebocmRNJBQ8n24PHvLTDNw8n-m1ml