Real Exam Questions 500-920 Dumps Exam Questions in here [Oct-2021]
Get Latest Oct-2021 Conduct effective penetration tests using 500-920
NEW QUESTION 18
Which two interfaces allow access to Cisco UCS Manager? (Choose two )
- A. Cisco IMC
- B. Cisco UCS Manager GUI
- C. Cisco UCS Manager XML API
- D. Cisco KVM
Answer: B,C
NEW QUESTION 19
Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?
- A. The server does not have a service profile assigned, but has been discovered by UCS Manager
- B. The server has a service profile assigned, but has connectivity issues with UCS Manager
- C. The server is not properly connected
- D. The server has been properly connected, but has not been discovered by UCS Manager
Answer: C
NEW QUESTION 20
A new UCS dual fabric cluster is being configured with a single chassis. The administrator notices that the cluster is not in High Availability (HA) mode. What is the possible cause?
- A. The HA plugin has not been installed in UCS Manager
- B. The UCS-FI-HA license has not been activated in UCS Manager
- C. The links to the chassis are not enabled
- D. No uplinks are active into the data center.
Answer: A
NEW QUESTION 21
In order to create an Inband Profile for Cisco Integrated Management Controller (IMC) connectivity, what do you need to perform first?
- A. Create an IPMI Policy
- B. Create a Management IP Pool, a MAC Address Pool, and a VLAN Pool
- C. Create a Management IP Pool, a VLAN. and a VLAN Group
- D. Create a Service Profile
- E. Create different VLANs, with different VLAN IDs
Answer: D
NEW QUESTION 22
What is the result of enabling the Core File Exporter in UCS Manager?
- A. A core dump file will be immediately created and transmitted using HTTP protocol
- B. A core dump must be remotely activated by Cisco TAC.
- C. A core dump will immediately be generated and will be exported
- D. If a subsequent triggering event occurs, a core dump will be generated and sent by TFTP
Answer: C
NEW QUESTION 23
Which two components are required when the integration of Cisco UCS C-series servers within a Cisco UCS Manager Direct Connect mode? (Choose two )
- A. Compatible Cisco UCS Manager version
- B. Compatible UCS 6200 or 6300 Fabric Interconnects
- C. Cisco Management Controller
- D. Compatible Cisco Nexus Fabric Extenders
- E. Compatible UCS VIC adapter installed via the server's PCIe or MLOM slot
Answer: B,E
NEW QUESTION 24
After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )
- A. Cisco Fabric Interconnects
- B. VIC Cards and Fiber Channel HBAs
- C. RAID Controllers
- D. Cisco UCS Manager
Answer: A,B
NEW QUESTION 25
Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?
- A. Cisco UCS Manager
- B. Cisco Application Gateways
- C. Cisco Data Management Engine
- D. Cisco Finite State Machine
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_0100.html
NEW QUESTION 26
Which two formats can be configured for Cisco's Call Home email message? (Choose two )
- A. JSON
- B. Full text
- C. CSV
- D. XML
Answer: B,D
Explanation:
Call Home Message Formats The Call Home feature offers the following message formats: * Short Text - Suitable for pagers or printed reports. * Plain Text - Full formatted message information suitable for human reading. * XML - Matching readable format using Extensible Markup Language (XML) and Adaptive Markup Language (AML) document type definitions (DTDs). The XML format enables communication with the Cisco TAC. For user-defined destination profiles, the format options are long-text, short-text, or XML. The default is XML. For the predefined Cisco TAC profile, only XML is allowed.
Reference:
http://www.audentia-gestion.fr/cisco/smart-call-home-feature-guide-1611.pdf
NEW QUESTION 27
What is the next step after performing a UCS firmware upgrade, and downloading the latest drivers both for your RAID Controller and your Fibre Channel HBA?
Check the HCL
- A. Test device driver compatibility
- B. No need to do anything Drivers are automatically installed for you
- C. No Drivers are needed in a UCS environment
- D. Apply the device driver update to the devices
Answer: A
NEW QUESTION 28
Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?
- A. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects
- B. The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch
- C. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
- D. The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
Answer: C
NEW QUESTION 29
What are three possible causes of service profile association failure due to iSCSI configuration issue? (Choose three )
- A. Inappropriate network configuration
- B. Misconfigured iSCSI parameters
- C. iSCSI Target out of configured range of services
- D. Misconfigured LUN. LUN masking
- E. Wrong WWNN
- F. Improperly assigned iSCSI Class of Service
Answer: A,B,C
NEW QUESTION 30
You are in the process of upgrading your UCS M3 Server to a newer UCS M4 Server. You associate the Service Profile to the new UCS Server, but it fails to boot You suspect of a failed boot hard drive. You check your RAID1 Boot LUN in UCS Manager, but see no error messages What could be causing the issue?
- A. A misconfiguration on the Service Profile Local Disk Policy
- B. A misconfiguration on the Service Profile Local Boot Policy
- C. The newer Cisco UCS M4 Server is using flash drives, not hard drives
- D. The newer Cisco UCS M4 Server is using disks of larger capacity than the previous UCS M3 Server
Answer: C
NEW QUESTION 31
When troubleshooting, which option is the primary uses of the SCOPE command?
- A. To access the log files that reside in a component
- B. To access the log files on the virtual machines
- C. To access the log files on the log server
- D. The SCOPE command is not helpful in this case
Answer: A
NEW QUESTION 32
When booting up a Cisco UCS Server you want to see boot time diagnostic messages of the POST, what action is required for you to do so?
- A. Enable Quiet Boot on the Server's BIOS
- B. Disable Fast Boot on the Server's Service Profile
- C. Disable Fast Boot on the Server's BIOS
- D. Restart the Server
- E. Enable Quiet Boot on the Server's Service Profile
Answer: E
NEW QUESTION 33
Which statement regarding the UCS C-senes connectivity modes best describes connectivity options in a UCS Manager integrated environment?
- A. All UCS C-series servers in a single UCS Manager domain must share the same connectivity model
- B. UCS C-series servers may be connected with or without the use of Fabric Extenders (FEX) in environments running UCS Manager Software Release 2 2 or later
- C. UCS C-series servers must be connected to Fabric Interconnects using Fabric Extenders (FEX)
- D. UCS C-series servers may be connected to multiple UCS Manager domains at the same time
Answer: B
NEW QUESTION 34
......
Authentic Best resources for 500-920 Online Practice Exam: https://www.troytecdumps.com/500-920-troytec-exam-dumps.html