Pass 156-315.81 Exam in First Attempt Guaranteed 2022 Dumps!
156-315.81 Dumps Full Questions - Exam Study Guide
Check Point 156-315.81 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| ClusterXL: Load Sharing | - Multicast Load Sharing - Unicast Load Sharing - How Packets Travel Through a Unicast - LS Cluster - Sticky Connections |
| Advanced VPN Concepts and Practices | - IPsec - Internet Key Exchange (IKE) - IKE Key Exchange Process - Phase 1/ Phase 2 Stages |
| Advanced Firewall | Objectives:
|
| User Management | - Active Directory OU Structure - Using LDAP Servers with Check Point - LDAP User Management with User Directory - Defining an Account Unit - Configuring Active Directory Schemas - Multiple User Directory (LDAP) Servers - Authentication Process Flow - Limitations of Authentication Flow - User Directory (LDAP) Profiles |
| Remote Access VPNs | - Connection Initiation - Link Selection |
| Auditing and Reporting Process | - Auditing and Reporting Standards |
| CoreXL: Multicore Acceleration | - Supported Platforms and Features - Default Configuration - Processing Core Allocation - Allocating Processing Cores - Adding Processing Cores to the Hardware - Allocating an Additional Core to the SND - Allocating a Core for Heavy Logging - Packet Flows with SecureXL Enabled |
| SmartReporter | - Report Types |
| Multiple Entry Point VPNs | - How Does MEP Work - Explicit MEP - Implicit MEP |
| Upgrading Standalone Full High Availability | |
| Tunnel Management | - Permanent Tunnels - Tunnel Testing - VPN Tunnel Sharing - Tunnel-Management Configuration - Permanent-Tunnel Configuration - Tracking Options - Advanced Permanent-Tunnel configuration - VPN Tunnel Sharing Configuration |
| Lab 2: Core CLI Elements of Firewall Administration | - Policy Management and Status - Verification from the CLI - Using cpinfo - Run cpinfo on the Security Management Server - Analyzing cpinfo in InfoView - Using fw ctl pstat - Using tcpdump |
| Lab 7: SmartEvent and SmartReporter | - Configure the Network Object in SmartDashboard - Configuring Security Gateways to work with SmartEvent - Monitoring Events with SmartEvent - Generate Reports Based on Activities |
| Advanced User Management | Objectives:
|
| SmartEvent | - SmartEvent Intro |
| Clustering and Acceleration | Objectives:
|
| Advanced IPsec VPN and Remote Access | Objectives:
|
| SecureXL: Security Acceleration | - What SecureXL Does - Packet Acceleration - Session Rate Acceleration - Masking the Source Port - Application Layer Protocol - An Example with HTTP HTTP 1.1 - Factors that Preclude Acceleration - Factors that Preclude Templating (Session Acceleration) - Packet Flow - VPN Capabilities |
| Security Gateway | - User and Kernel Mode Processes - CPC Core Process - FWM - FWD - CPWD - Inbound and Outbound Packet Flow - Inbound FW CTL Chain Modules - Outbound Chain Modules - Columns in a Chain - Stateful Inspection |
| Identity Awareness | - Enabling AD Query - AD Query Setup - Identifying users behind an HTTP Proxy - Verifying there’s a logged on AD user at the source IP - Checking the source computer OS - Using SmartView Tracker |
| Lab 4: Configuring SmartDashboard to Interface with Active Directory | - Creating the Active Directory Object in SmartDashboard - Verify SmartDashboard Communication with the AD Server |
| Troubleshooting User Authentication and User Directory (LDAP) | - Common Configuration Pitfalls - Some LDAP Tools - Troubleshooting User Authentication |
| Backup and Restore Security Gateways and Management Servers | - Snapshot management - Upgrade Tools - Backup Schedule Recommendations - Upgrade Tools - Performing Upgrades - Support Contract |
| Network Address Translation | - How NAT Works - Hide NAT Process - Security Servers - How a Security Server Works - Basic Firewall Administration - Common Commands |
| Auditing and Reporting | Objectives:
|
| Clustering and Acceleration | - Clustering Terms - ClusterXL - Cluster Synchronization - Synchronized-Cluster Restrictions - Securing the Sync Interface - To Synchronize or Not to Synchronize |
Why is it that important to be certified in the CheckPoint 156-315.81 Exam?
The best way to become certified in the CheckPoint 156-315.81 Exam is by preparing with a certified training course. The reason for this is because you will be able to pass your exam after taking these courses. These courses have been designed by experts who are also certified in the CheckPoint 156-315.81 Exam, so they know how to help you pass your exam each time you take it. CheckPoint 156-315.81 exam dumps provides you with the most accurate, reliable and valid preparation practice exams for your exam.
It is important for you to understand that there are many people who want to learn about IT security and network security, but they do not know where to start or what resources they should use in order to get started on their own journey of learning about IT security and network security. This is where we come in! We have designed our own training courses that will teach you everything you need to know about IT security and network security so that when it comes time for you to pass your CheckPoint 156-315.81 Exam you will feel confident that you know all there is about both subjects without having to spend hours trying.
NEW QUESTION 219
After verifying that API Server is not running, how can you start the API Server?
- A. Run command "mgmt api start" in CLISH mode
- B. Run command "mgmt__cli set api start" in Expert mode
- C. Run command "set api start" in CLISH mode
- D. Run command "api start" in Expert mode
Answer: B
NEW QUESTION 220
When an encrypted packet is decrypted, where does this happen?
- A. Outbound chain
- B. Inbound chain
- C. Decryption is not supported
- D. Security policy
Answer: D
NEW QUESTION 221
CoreXL is supported when one of the following features is enabled:
- A. Route-based VPN
- B. IPv6
- C. IPS
- D. Overlapping NAT
Answer: C
Explanation:
CoreXL does not support Check Point Suite with these features:
NEW QUESTION 222
The following command is used to verify the CPUSE version:
- A. HostName:0>show installer build
- B. HostName:0>show installer status build
- C. [Expert@HostName:0]#show installer status
- D. [Expert@HostName:0]#show installer status build
Answer: B
NEW QUESTION 223
The Compliance Blade allows you to search for text strings in many windows and panes, to search for a value in a field, what would your syntax be?
- A. field_name:string
- B. field name:string
- C. name field:string
- D. name_field:string
Answer: A
NEW QUESTION 224
The Security Gateway is installed on GAIA R81. The default port for the Web User Interface is ______ .
- A. TCP 18211
- B. TCP 443
- C. TCP 4433
- D. TCP 257
Answer: B
NEW QUESTION 225
What is true about the IPS-Blade?
- A. In R81, in the IPS Layer, the only three possible actions are Basic, Optimized and Strict
- B. In R81, IPS Exceptions cannot be attached to "all rules"
- C. In R81, IPS is managed by the Threat Prevention Policy
- D. In R81, the GeoPolicy Exceptions and the Threat Prevention Exceptions are the same
Answer: C
NEW QUESTION 226
Please choose the path to monitor the compliance status of the Check Point R81.10 based management.
- A. Compliance blade not available under R81.10
- B. Logs & Monitor --> New Tab --> Open compliance View
- C. Gateways & Servers --> Compliance View
- D. Security & Policies --> New Tab --> Compliance View
Answer: B
NEW QUESTION 227
There are two R77.30 Security Gateways in the Firewall Cluster. They are named FW_A and FW_B. The cluster is configured to work as HA (High availability) with default cluster configuration. FW_A is configured to have higher priority than FW_B. FW_A was active and processing the traffic in the morning. FW_B was standby. Around 1100 am, its interfaces went down and this caused a failover. FW_B became active. After an hour, FW_A's interface issues were resolved and it became operational.
When it re-joins the cluster, will it become active automatically?
- A. No, since 'maintain' current active cluster member' option on the cluster object properties is enabled by default.
- B. Yes, since 'Switch to higher priority cluster member' option on the cluster object properties is enabled by default.
- C. Yes, since 'Switch to higher priority cluster member' option is enabled by default on the Global Properties.
- D. No, since 'maintain' current active cluster member' option is enabled by default on the Global Properties.
Answer: A
NEW QUESTION 228
Which firewall daemon is responsible for the FW CLI commands?
- A. cpd
- B. fwd
- C. fwm
- D. cpm
Answer: B
NEW QUESTION 229
Fill in the blank: The tool _____ generates a R81 Security Gateway configuration report.
- A. infoview
- B. infoCP
- C. cpinfo
- D. fw cpinfo
Answer: C
NEW QUESTION 230
What are the two high availability modes?
- A. New and Legacy
- B. Load Sharing and Legacy
- C. Active and Standby
- D. Traditional and New
Answer: A
Explanation:
ClusterXL has four working modes. This section briefly describes each mode and its relative advantages and disadvantages.
NEW QUESTION 231
To fully enable Dynamic Dispatcher on a Security Gateway:
- A. run fw ctl multik set_mode 9 in Expert mode and then Reboot.
- B. Edit/proc/interrupts to include multik set_mode 1 at the bottom of the file, save, and reboot.
- C. Using cpconfig, update the Dynamic Dispatcher value to "full" under the CoreXL menu.
- D. run fw multik set_mode 1 in Expert mode and then reboot.
Answer: A
NEW QUESTION 232
You need to see which hotfixes are installed on your gateway, which command would you use?
- A. cpinfo -o hotfix
- B. cpinfo -h all
- C. cpinfo -l hotfix
- D. cpinfo -y all
Answer: D
NEW QUESTION 233
John is using Management HA. Which Security Management Server should he use for making changes?
- A. active SmartConsole
- B. connect virtual IP of Smartcenter HA
- C. primary Log Server
- D. secondary Smartcenter
Answer: A
NEW QUESTION 234
......
What is the salary of a CheckPoint 156-315.81 certified professional?
The Average salary of different countries for CheckPoint 156-315.81 Certified professional
UK - Pounds 61408 per year
India - INR 5846790 per year
United States - USD 75,000 per year
Check Point Certified Security Expert Free Certification Exam Material from TroytecDumps with 508 Questions: https://www.troytecdumps.com/156-315.81-troytec-exam-dumps.html
Use Real 156-315.81 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=1tVhi0MDMWY3ULEyapMp6itag12zx6KRd