Updated Cisco 300-425 Dumps – Check Free 300-425 Exam Dumps (2023)
Updated 300-425 exam with Cisco Real Exam Questions
The Cisco 300-425 exam is designed to evaluate the applicants’ knowledge of wireless network design. This is one of the concentration tests that the candidates are required to complete along with the core exam for obtaining the CCNP Enterprise certification. Moreover, those individuals who achieve the passing score will be awarded the Cisco Certified Specialist – Enterprise Wireless Design certificate.
NEW QUESTION 16
A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?
- A. RRM
- B. Cisco Centralized Key Management
- C. Band Select
- D. load balancing
Answer: C
Explanation:
NEW QUESTION 17
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)
- A. fewer antennas than laptops
- B. no support for 802.11r
- C. no support for 802.11ac
- D. lower data rates than laptops
- E. higher data rates than laptops
Answer: A,D
Explanation:
NEW QUESTION 18
An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul, regardless of region deployed, which design meets this requirement?
- A. redundant controllers in the most restrictive regulatory domain
- B. redundant controllers in the least restrictive regulatory domain
- C. one controller per continent
- D. one controller per country code
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/country_codes.html
NEW QUESTION 19
An engineer must perform a pre-deployment site survey for a new building in a high-security are a. The design must provide a primary signal RSSI of -65 dBm for the clients. Which two requirements complete This design? (Choose two)
- A. WLC model
- B. Number of clients
- C. HAVC access
- D. AP model
- E. Site access
Answer: B,D
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html
NEW QUESTION 20
A company wants to replace its existing PBX system with a new VoIP System that will include wireless IP phones. The CIO has concerns about whether the company's existing wireless network can support the new system. Which tool in Cisco Prime can help ensure that the current network will support the new phone system?
- A. Voice Readiness
- B. Map Editor
- C. Site Calibration
- D. Location Readiness
Answer: A
Explanation:
Section: Wired and Wireless Infrastructure
NEW QUESTION 21
An engineer is conducting a Layer 2 site survey. Which type of client must the engineer match to the survey?
- A. worst client available
- B. phone client
- C. normal client
- D. best client available
Answer: C
NEW QUESTION 22
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?
- A. One AP should be deployed per 3000 square feet.
- B. The edge of the cell should be below 35 RSSI.
- C. The measurement should be done on the 2.4-GHz band.
- D. The edge of the cell should be -67 dBm.
Answer: D
Explanation:
NEW QUESTION 23
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
- A. mping
- B. eping
- C. rping
- D. ping
Answer: D
NEW QUESTION 24
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?
- A. voice design model
- B. location design model
- C. roaming design model
- D. high-density design model
Answer: D
Explanation:
https://www.cisco.com/c/dam/en_us/solutions/industries/docs/education/cisco_wlan_design_guide.pdf
NEW QUESTION 25
An engineer performs a Layer 1 survey by using Metegeek chanalyzer only on the current operating channel. Which operating mode is configured for a Cisco CleanAIR AP?
- A. SE-connect
- B. Monitor
- C. Local
- D. Sniffer
Answer: C
Explanation:
NEW QUESTION 26
A wireless engineer is designing a wireless network to support real-time applications over wireless. Which IEEE protocol mus the engineer enable on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
- A. 802.11w
- B. 802.11r
- C. 802.11i
- D. 802.11k
Answer: D
NEW QUESTION 27
Which feature is supported with the PPPoE client?
- A. QoS on the dialer interface
- B. Dial-on-demand
- C. MLPPP on the interface
- D. DMVPN
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 28
A network engineer is working on a predictive WLAN design. The new wireless network must support access to internet, email, voice, and the inventory database To successfully support these services, which configuration must the engineer use for the signal strength levels and SNR on the planning tool?
- A. signal strength of -67 dBm. 20-dB SNR. and maximum 5 percent packet loss
- B. signal strength of -67 dBm. 25-dB SNR. and maximum 1 percent packet loss
- C. signal strength of 67 dBm. 20-dB SNR and maximum 1 percent packet loss
- D. signal strength of -70 dBm. 30-dB SNR. and maximum 10 percent packet loss
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html
NEW QUESTION 29
A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?
- A. corner only
- B. indoor and outdoor
- C. perimeter and corner
- D. perimeter only
Answer: C
Explanation:
NEW QUESTION 30
An engineer is designing a wireless network to support high availability. The network will need to support the total number of APs and client SSO. Live services should continue to work without interruption during the failover Which two requirements need to be incorporated into the design to meet these needs? (Choose two.)
- A. WLC 7.5 code or more recent
- B. controller high availability pair with one of the WLCs having a valid AP count license
- C. 10 sec RTT
- D. redundant WLC
- E. back-to-back direct connection between WLCs
Answer: B,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId
NEW QUESTION 31
Which two considerations must a network engineer have when planning for voice over wireless roaming?
(Choose two.)
- A. Roaming with only 802.1x authentication requires full reauthentication.
- B. Full reauthentication introduces gaps in a voice conversation.
- C. Roaming occurs when the phone has seen at least four APs.
- D. Roaming occurs when the phone has reached -80 dBs or below.
- E. Roaming time increases when using 802.1x + Cisco Centralized Key Management.
Answer: A,B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan41dg-book/vowlan_ch
NEW QUESTION 32
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
- A. It is an IPsec tunnel with control path and data path.
- B. It is a CAPWAP tunnel with data path only.
- C. It is a CAPWAP tunnel with control path and data path.
- D. It is an IPsec tunnel with control path only.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/mobility.html
NEW QUESTION 33
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?
- A. One AP should be deployed per 3000 square feet.
- B. The edge of the cell should be below 35 RSSI.
- C. The measurement should be done on the 2.4-GHz band.
- D. The edge of the cell should be -67 dBm.
Answer: D
NEW QUESTION 34
An engineer Is trying to determine the most cost-effective way to deploy high availability for a campus enterprise wireless network that currently leverages three wireless LAN controllers. Which architecture should the engineer deploy?
- A. N+1 solution without SS0
- B. N+1 with SSO
- C. N+N with SSO
- D. N+N solution without SSO
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide/N1_HA_Overview.html?
NEW QUESTION 35
Refer to the exhibit. An enterprise is using wireless as the main network connectivity for clients. To ensure service continuity. a pair of controllers will be installed in a datacentre. An engineer is designing SSO on the pair of controllers. What needs to be included in the design to avoid having the secondary controller go into maintenance mode?
- A. The Keep alive timer is too low. which causes synchronization problems.
- B. The redundancy port must be the same subnet as the redundancy mgmt.
- C. The connection between the redundancy ports is missing.
- D. The Global Configuration of SSO is set to Disabled on the controller.
Answer: C
Explanation:
'There are few scenarios where the Standby WLC may go into Maintenance Mode and not be able to communicate with the network and peer: * Non reachability to Gateway via Redundant Management Interface * WLC with HA SKU which had never discovered peer * Redundant Port is down * Software version mismatch (WLC which boots up first goes into active mode and the other WLC in Maintenance Mode)' High Availability (SSO) Deployment Guide - Cisco
NEW QUESTION 36
What is the attenuation value of a human body on a wireless signal?
- A. 3 dB
- B. 6 dB
- C. 4 dB
- D. 12 dB
Answer: C
Explanation:
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/Voice.html
NEW QUESTION 37
Refer to the exhibit.
What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
- A. power supply considerations
- B. aesthetics
- C. antenna gain
- D. transmit power considerations
Answer: D
NEW QUESTION 38
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)
- A. no support for 802.11r
- B. no support for 802.11ac
- C. fewer antennas than laptops
- D. lower data rates than laptops
- E. higher data rates than laptops
Answer: D,E
Explanation:
NEW QUESTION 39
Refer to the exhibit.
What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
- A. power supply considerations
- B. aesthetics
- C. antenna gain
- D. transmit power considerations
Answer: D
Explanation:
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html#wp1000551
NEW QUESTION 40
......
What Are the Details of the Test?
Cisco doesn't provide much information about ENWLSD 300-425. However, applicants should be ready to answer multiple-choice and multiple-answer questions. You might find some drag and drop items as well. When it comes to the minimum passing score, one should answer correctly from 80 to 85% of the questions. Finally, 90 minutes are given to applicants to answer all questions.
The test is delivered in both English and Japanese languages. You can take the exam by registering via the Pearson VUE platform. All you have to do is open an account on the platform and follow the instructions in the “Proctored Exams” section. Besides, the enrollment fee for 300-425 is $300.
Actual 300-425 Exam Recently Updated Questions with Free Demo: https://www.troytecdumps.com/300-425-troytec-exam-dumps.html
Free Cisco 300-425 Exam Questions: https://drive.google.com/open?id=10_o8HVx_tv4JtaqAYELtLyWqcl-exS2K