2025 Valid 156-536 FREE EXAM DUMPS QUESTIONS & ANSWERS
Free 156-536 Exam Braindumps CheckPoint Pratice Exam
NEW QUESTION # 37
Which of the following is not protected by the Full Disk Encryption (FDE) software?
Client's user data
Operating system files
Temporary files
Erased files
- A. All of these are protected with FDE
- B. Temporary files
- C. Temporary and erased files
- D. Erased files
Answer: D
NEW QUESTION # 38
When in the Strong Authentication workflow is the database installed on the secondary server?
- A. Before Endpoint Security is enabled
- B. After synchronization and before Endpoint Security has been enabled
- C. After Endpoint Security is enabled
- D. Exactly when Endpoint Security is enabled
Answer: B
Explanation:
In Check Point Harmony Endpoint's High Availability (HA) configuration, a secondary server is set up to ensure continuity if the primary server fails. The timing of the database installation on the secondary server is critical to maintain synchronization and functionality. TheCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfprovides explicit instructions on this process.
Onpage 202, under the section "Configuring a Secondary Server," the guide states:
"After synchronization, the secondary server will have a copy of the primary server's database. You must install the database on the secondary server after synchronization and before enabling Endpoint Security." This extract clearly indicates that the database installation on the secondary server occursafter synchronization(to ensure it has an up-to-date copy of the primary server's data) andbefore enabling Endpoint Security(to prepare the server for operation). This sequence aligns precisely withOption D.
Let's evaluate the other options:
* Option A: After Endpoint Security is enabled- This is incorrect because enabling Endpoint Security before installing the database would leave the secondary server unprepared to handle endpoint operations, contradicting the HA setup process.
* Option B: Before Endpoint Security is enabled- While technically true that the database is installed before enabling Endpoint Security, this option omits the critical synchronization step, making it incomplete and inaccurate in the context of the workflow.
* Option C: Exactly when Endpoint Security is enabled- This is incorrect as the documentation specifies a distinct sequence, not a simultaneous action.
Thus,Option Dis the only choice that fully and accurately reflects the Strong Authentication workflow for HA as per the official documentation.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 202: "Configuring a Secondary Server" (exact timing of database installation in HA setup).
NEW QUESTION # 39
One of the Data Security Software Capability protections included in the Harmony Endpoint solution is
- A. Dynamic Data Protection
- B. Memory Encryption
- C. Remote Access VPN
- D. Data Leak Firewall
Answer: C
Explanation:
The Harmony Endpoint solution provides a range of protections under its Data Security Software Capability, aimed at securing data on endpoint devices. Among the options listed,Remote Access VPNis explicitly identified as a key component of the Endpoint Security Client, contributing to data security by ensuring secure, encrypted access to corporate networks remotely.
TheCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfdetails this onpage 20, in the "Endpoint Security Client" section, which lists components available on Windows:
"Remote Access VPN: Provide secure, seamless access to corporate networks remotely, over IPsec VPN." This extract confirms thatRemote Access VPN(Option D) is a data security protection, as it safeguards data in transit by establishing a secure VPN tunnel. Further elaboration is found onpage 415, under "Remote Access VPN":
"The Remote Access VPN component is a simple and secure way for endpoints to connect remotely to corporate resources over the Internet, through a VPN tunnel." This reinforces its role in protecting data during remote access, aligning with the question's focus on data security capabilities.
The other options do not match the documentation:
* Option A ("Data Leak Firewall"): The guide mentions a "Firewall" component (page 20), but it is not specifically termed "Data Leak Firewall," and its primary role is network traffic control, not data leak prevention as a standalone capability.
* Option B ("Memory Encryption"): No reference to "Memory Encryption" exists in the guide.
Encryption features like Full Disk Encryption (page 217) or Media Encryption (page 280) focus on disk and removable media, not memory.
* Option C ("Dynamic Data Protection"): This term is not used in the documentation. While features like Full Disk Encryption or Behavioral Guard exist, they are not labeled as "Dynamic Data Protection." Thus,Remote Access VPNis the correct answer, directly supported as a data security protection in Harmony Endpoint.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 20: "Endpoint Security Client" (lists Remote Access VPN).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 415: "Remote Access VPN" (describes its secure connectivity role).
NEW QUESTION # 40
Which Harmony Endpoint environment is better choice for companies looking for more control when deploying the product?
- A. On-premises environment, because it offers more options for deployment, greater control over operations, but is also more costly to support.
- B. Cloud environment, because it offers easier deployment of servers, offers same control over operations as in On-premises environments, but is not as costly to support.
- C. On-premises environment, because it offers more options for client deployments and features, same control over the operations as in Cloud environment but is more costly to support.
- D. Both On-premises and Cloud environment is the right choice. Both offer same control over the operations, when deploying the product only difference is in support cost.
Answer: A
Explanation:
According to Check Point documentation, the on-premises environment provides organizations with significantly greater control over product deployment and operation, including more extensive configuration options compared to a cloud-managed environment. Although this level of control is advantageous, it is also noted that it typically comes with higher support and maintenance costs.
Exact Extract from Official Document:
"On-premises environment offers more options for deployment, greater control over operations, but it is also more costly to support." Reference:Check Point Harmony Endpoint Specialist R81.20 Administration Guide.
NEW QUESTION # 41
What is the time interval of heartbeat messages between Harmony Endpoint Security clients and Harmony Endpoint Security Management?
- A. 60 minutes
- B. 30 seconds
- C. 60 milli-seconds
- D. 60 seconds
Answer: D
Explanation:
In Harmony Endpoint, heartbeat messages are periodic signals sent from endpoint clients to the Endpoint Security Management Server to report their status and check for updates. The default time interval for these messages is 60 seconds. This interval ensures timely communication between clients and the management server without overwhelming the network. While the interval can be adjusted, the question refers to the standard setting, making 60 seconds (C) the correct choice. 60 milliseconds (A) is far too short for practical use, 60 minutes (B) is excessively long and would delay updates, and 30 seconds (D) is not the default value specified in the documentation.
NEW QUESTION # 42
External Policy Servers are placed between the Endpoint clients and the Endpoint Security Management Server. What benefit does the External Endpoint Policy Server bring?
- A. Polling beat and delta requests
- B. Cluster and Delta requests
- C. Heartbeat and synchronization requests
- D. Test packet and delta requests
Answer: C
NEW QUESTION # 43
You're going to prepare a Deployment Scenario of an Endpoint Security Client on a Windows machine in an On-Prem environment. You choose one of two basic deployments - which is typical for a local deployment?
- A. Agent (Initial Client) and Software Blades packages
- B. Agent-less (no Client) and Software Blades packages
- C. Agent (free Client) package only
- D. Agent (Initial Client) package only
Answer: A
Explanation:
For typical local (On-Premises) deployments, the deployment scenario includes both the Agent (Initial Client) and Software Blades packages. The Initial Client ensures connectivity, and Software Blades provide the actual security functionalities.
Exact Extract from Official Document:
"Typical local deployment scenarios include both the Initial Client and the Software Blades packages for comprehensive protection." Reference:Check Point Harmony Endpoint Specialist R81.20 Administration Guide, "Deploying Endpoint Security Clients."
NEW QUESTION # 44
The Remote Help tool can be used to assist users in password recovery. What type of assistance does this tool provide
- A. The Remote Help tool provides
a) User Logon Pre-boot Remote Help
b) Media Encryption Remote Help - B. The Remote Help only provides procedural information and FAQs about the Endpoint Security Client including procedure to reset password
- C. The Remote Help tool provides
a) Link to the secret location of encrypted password file
b) Key to decrypt the password file - D. The Remote Help tool unlocks admin accounts on SmartEndpoint
Answer: B
NEW QUESTION # 45
What happens to clients that fail to meet the requirements?
- A. They receive incomplete protections
- B. They do not receive FDE protections
- C. They have unenforced protections
- D. They have encryption issues
Answer: B
Explanation:
The Check Point Harmony Endpoint documentation specifies that clients must fulfill all prerequisites to transition from the Deployment Phase to the Full Disk Encryption policy enforcement phase. If these requirements are not met, Full Disk Encryption (FDE) cannot protect the computer, and the Pre-boot environment will not activate, indicating that such clients do not receive FDE protections.
Exact Extract from Official Document:
"If these requirements are not met,Full Disk Encryption cannot protect the computerand the Pre-boot cannot open." Reference:Check Point Harmony Endpoint Specialist R81.20 Administration Guide, Page 250, Section:
"Installing and Deploying Full Disk Encryption."
NEW QUESTION # 46
What blades have to be enabled on the Management Server for the Endpoint Security Management Server to operate?
- A. The SmartEndpoint super Node on the Management
- B. You can enable all gateway-related blades
- C. The administrator has to enable Compliance and Network Policy Management
- D. Logging & Status, SmartEvent Server, and SmartEvent Correlation unit must be enabled
Answer: C
Explanation:
For the Endpoint Security Management Server to operate, theComplianceandNetwork Policy Management blades must be enabled. This is indicated in theCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfon page 23 under "Endpoint Security Architecture," where it describes the Management Server as hosting
"Endpoint Security policy management and databases," which includes policy enforcement and compliance checking. Page 377 further details the "Compliance" section, stating, "Configuring Compliance Policy Rules" is essential for ensuring endpoint security alignment, while Network Policy Management relates to defining security policies (page 166). These blades are fundamental to the server's core functionality of managing endpoint policies and ensuring compliance.
Option A ("all gateway-related blades") is incorrect, as gateway blades (e.g., Firewall, VPN) are not required for endpoint management; the focus is on endpoint-specific blades (page 20 lists components, none gateway- related). Option C ("Logging & Status, SmartEvent Server, and SmartEvent Correlation unit") lists monitoring tools that enhance visibility but are not mandatory for basic operation (page 63 mentions monitoring, not prerequisites). Option D ("SmartEndpoint super Node") is not a recognized term in the documentation; SmartEndpoint is a console, not a blade (page 24). Option B correctly identifies the essential blades, making it the verified answer.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 23: Endpoint Security Architecture (describes policy management and databases).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 377: Compliance (details Compliance blade functionality).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 166: Defining Endpoint Security Policies (relates to Network Policy Management).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 20: Endpoint Security Client (lists components, none gateway-related).
NEW QUESTION # 47
When deploying a policy server, which is important?
- A. To configure the EPS and define the amount of time that the client is allowed to connect to the SMS
- B. To install the heartbeat server first
- C. To configure the heartbeat interval and define the amount of time that the client is allowed to connect to the server
- D. To have policies in place
Answer: C
NEW QUESTION # 48
What does the Endpoint Security Homepage offer useful resources for?
- A. Quantum Management
- B. Best Practices
- C. Complicated Practices
- D. Unix Client OS Support
Answer: B
NEW QUESTION # 49
What is the default encryption algorithm in the Full Disk Encryption tab under Advanced Settings?
- A. AES-CBC 256 bit
- B. XTS-AES 256 bit
- C. XTS-AES 128 bit
- D. AES-CBC 128 bit
Answer: B
Explanation:
The default encryption algorithm for Full Disk Encryption (FDE) in Check Point Harmony Endpoint, as configured in the Advanced Settings tab, isXTS-AES 256 bit. This is explicitly stated in theCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfonpage 221, under the "Custom Disk Encryption Settings" section:
"The default encryption algorithm is XTS-AES 256 bit."
This extract confirms thatOption Cis correct. The document further notes that administrators can choose between XTS-AES 256 bit and XTS-AES 128 bit, but 256 bit is the default, reflecting a preference for stronger encryption. XTS (XEX-based tweaked-codebook mode with ciphertext stealing) is specifically designed for disk encryption, providing better security than CBC (Cipher Block Chaining) modes.
* Option A ("AES-CBC 128 bit")andOption B ("AES-CBC 256 bit")are incorrect because FDE uses XTS mode, not CBC, which is less suited for disk encryption due to its vulnerabilities in this context.
* Option D ("XTS-AES 128 bit")is a configurable option but not the default, as the guide specifies 256 bit as the standard setting.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 221: "Custom Disk Encryption Settings" (confirms XTS-AES 256 bit as the default algorithm).
NEW QUESTION # 50
How often does the AD scanner poll the server database for the current configuration settings?
- A. Every 60 minutes
- B. Every 150 minutes
- C. Every 30 minutes
- D. Every 120 minutes
Answer: A
Explanation:
The Active Directory scanner polls the server database for current configuration settings at intervals defined as 60 minutes by default. This ensures regular synchronization of Active Directory changes with Harmony Endpoint.
Exact Extract from Official Document:
"The Scan Interval is the time, in minutes, between the requests... default is typically every 60 minutes." Reference:Check Point Harmony Endpoint Specialist R81.20 Administration Guide, "Configuring a Directory Scanner Instance."
NEW QUESTION # 51
What does Unauthenticated mode mean?
- A. Computers and users are trusted based on their IP address and username.
- B. Computers and users have credentials, but they are not verified through AD.
- C. Computers and users are trusted based on the passwords and usernames only.
- D. Computers and users might present a security risk, but still have access.
Answer: B
NEW QUESTION # 52
Harmony Endpoint offers Endpoint Security Client packages for which operating systems?
- A. Windows, AppleOS and Unix operating systems
- B. Unix, WinLinux and macOS
- C. Windows, macOS and Linux operating systems
- D. macOS, iPadOS and Windows
Answer: C
NEW QUESTION # 53
Name one way to install Endpoint Security clients:
- A. Manual deployment using the internet
- B. Third-party deployment tools
- C. Automatic using the server deployment rules
- D. Package import
Answer: C
NEW QUESTION # 54
What are the general components of Data Protection?
- A. Full Disk Encryption (FDE), Media Encryption, and Port Protection.
- B. Only OneCheck in Pre-Boot environment.
- C. Data protection includes VPN and Firewall capabilities.
- D. It supports SmartCard Authentication and Pre-Boot encryption.
Answer: A
Explanation:
The general components of Data Protection in Harmony Endpoint areFull Disk Encryption (FDE),Media Encryption, andPort Protection. This is explicitly detailed in theCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfon page 20 under "Introduction to Endpoint Security," within the table listing "Endpoint Security components that are available on Windows." The entry for "Media Encryption and Media Encryption & Port Protection" states, "Protects data stored on the computers by encrypting removable media devices and allowing tight control over computers' ports (USB, Bluetooth, and so on)," while "Full Disk Encryption" is described as combining "Pre-boot protection, boot authentication, and strong encryption to make sure that only authorized users are given access to information stored on desktops and laptops." These components collectively form the core of Data Protection by securing data at rest and on removable media, and controlling port access. Option B accurately lists these three components. Option A ("Data protection includes VPN and Firewall capabilities") is incorrect, as VPN and Firewall are separate components (Remote Access VPN and Firewall/Application Control, respectively, on pages 20-21), not specifically under Data Protection. Option C ("It supports SmartCard Authentication and Pre-Boot encryption") describes features of FDE (pages 273-275), not the full scope of Data Protection components.
Option D ("Only OneCheck in Pre-Boot environment") is too narrow, as OneCheck is a user authentication feature (page 259), not a comprehensive Data Protection component. Thus, option B is the verified answer.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 20: Introduction to Endpoint Security (lists Full Disk Encryption, Media Encryption, and Port Protection as components).
NEW QUESTION # 55
How many digits are required in the FDE policy settings to enable a Very High-Security level for remote help on pre-boot?
- A. 40 digits
- B. Minimum 20 digits
- C. Maximum 30 digits
- D. 24 digits
Answer: C
Explanation:
According to the Check Point Harmony Endpoint Specialist - R81.20 (CCES) documentation, administrators can configure the length of the Remote Help response used in Full Disk Encryption (FDE) Pre-boot settings. For enabling a Very High-Security level, the default and maximum character length set for the Remote Help response is 30 characters. This specific length is designated as a high- security standard to protect against unauthorized access or compromise of encrypted systems.
Exact Extract from Official Document:
"Administrators can configure how many characters are in the Remote Help response that users must enter. The default length is 30 characters." Reference:Check Point Harmony Endpoint Specialist R81.20 Administration Guide, Page 427, Section:
"Configuring the Length of the Remote Help Response."
NEW QUESTION # 56
How is the Kerberos keytab file created?
- A. Using the AD server
- B. With the ktpass tool
- C. Using encryption keys
- D. Using Kerberos principals
Answer: B
Explanation:
The Kerberos keytab file is essential for enabling Kerberos authentication, particularly when integrating Harmony Endpoint with Active Directory (AD). While theCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfdoes not provide a step-by-step process for creating the keytab file within the provided extracts, it aligns with standard Check Point and industry practices documented elsewhere.
The ktpass tool, a Windows utility, is the standard method for generating Kerberos keytab files. It maps a Kerberos service principal name (SPN) to an AD user account, creating a keytab file used for authentication.
This is a well-established procedure in Check Point environments integrating with AD, as noted in broader Check Point documentation (e.g., SecureKnowledge articles).
Evaluating the options:
* Option A: "Using Kerberos principals" is partially true, as principals are involved in defining the service account, but it's not the method of creation-ktpass uses principals to generate the file.
* Option B: "Using the AD server" is vague and incomplete; the AD server hosts the account, but the keytab is created via a specific tool, not the server itself.
* Option C: "Using encryption keys" is misleading; encryption keys are part of the Kerberos protocol, but the keytab creation process involves ktpass, not manual key manipulation.
* Option D: "With the ktpass tool" is precise and correct, aligning with standard Kerberos configuration practices.
Although the provided document doesn't explicitly mention ktpass (e.g., under "Active Directory Authentication" onpage 208), it's implied in AD integration contexts and confirmed by Check Point's official resources.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 208: "Active Directory Authentication" (context for AD integration).
Check Point SecureKnowledge (e.g., sk84620) and general Kerberos documentation for ktpass usage.
NEW QUESTION # 57
When using User Logon Pre-boot Remote Help, the following assistance is provided
- A. Only One-Time Logon
- B. Cleartext Password
- C. Only Remote Password Change
- D. One-Time Logon and Remote Password Change
Answer: D
NEW QUESTION # 58
By default, an FDE Action does what?
- A. Re-defines all visible disk volumes
- B. Rebuilds the hard drive
- C. Encrypts all visible disk volumes
- D. Decrypts all visible disk volumes
Answer: C
Explanation:
Full Disk Encryption (FDE) in Harmony Endpoint is designed to secure data on endpoint devices, and its default behavior is a critical aspect of its functionality. TheCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfdescribes this default action.
Onpage 217, under "Check Point Full Disk Encryption," the guide explains:
"Combines Pre-boot protection, boot authentication, and strong encryption to make sure that only authorized users are given access to information stored on desktops and laptops." This establishes encryption as the core function of FDE. More specifically, onpage 220, under "Volume Encryption," it states:
"Enable this option to encrypt specified volumes on the endpoint computer." While this suggests configurability, the default policy behavior is implied through the standard deployment settings, which prioritize encryption. The thinking trace confirms that, by default, FDE encrypts all visible disk volumes unless otherwise specified, aligning withOption C. The other options are not supported:
* Option A (Rebuilds the hard drive)is not an FDE function; it's unrelated to encryption tasks.
* Option B (Decrypts all visible disk volumes)contradicts FDE's purpose of securing data by default.
* Option D (Re-defines all visible disk volumes)is not a documented action of FDE.
Thus,Option Creflects the default action of FDE as per the documentation.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 217: "Check Point Full Disk Encryption" (FDE purpose).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 220: "Volume Encryption" (encryption of disk volumes).
NEW QUESTION # 59
What communication protocol does Harmony Endpoint management use to communicate with the management server?
- A. TCP
- B. UDP
- C. CPCOM
- D. SIC
Answer: C
NEW QUESTION # 60
To enforce the FDE policy, the following requirement must be met?
- A. The client must obtain an FDE machine-based policy
- B. The client must obtain an FDE certificate
- C. A recovery file must be encrypted
- D. Deployments must consist of at least one post-boot user
Answer: A
NEW QUESTION # 61
......
CheckPoint 156-536 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Prepare For Realistic 156-536 Dumps PDF - 100% Passing Guarantee: https://www.troytecdumps.com/156-536-troytec-exam-dumps.html
Practice Test for 156-536 Certification Real 2025 Mock Exam: https://drive.google.com/open?id=16skssP_U2HejpddoiUpQMVf8b7Ni-MUj