Aug-2021 Latest TroytecDumps E_S4HCON2022 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new E_S4HCON2022 Real Exam Questions!
NEW QUESTION 33
You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.
- A. Credentials of user DDIC in client 000 of the shadow system
- B. Credentials of user DDIC in the development client of the development system
- C. Credentials of a named user in the development client of the development system
- D. Credentials of a named user in client 000 of the shadow system
Answer: C
NEW QUESTION 34
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:
- A. MIGRATE J5T_DUR_XML file from a previous run
- B. Parameter file SAPup_add.par
- C. Breakpoint configuration file SAPUPPHAS.BRK
- D. Stack XML file calculated by the Maintenance Planner
Answer: A,D
NEW QUESTION 35
SUM was registered at the SAP Host Agent. Based on which information does the SAP Host Agent determine the path to the SUM directory.
- A. The path is taken from the URL entered in the browser to start SUM
- B. The path was stored in file host_profile during registration
- C. The path was stored to the environment of user <sid>adm during registration
- D. The path was stored in file sumabap conf during registration
Answer: D
NEW QUESTION 36
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
- B. In the job log for the corresponding job in SM37 (Job Overview)
- C. In the corresponding R3trans log files of this phase
- D. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
Answer: A,B
NEW QUESTION 37
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:
- A. Downtime migration (EU_CLONE_MIG_DT_RUN)
- B. ParaUel distribution (PARDIST_SHD)
- C. Uptime migration (EU_CLONE_MIG_UT_RUN)
- D. Shadow repository creation (EU_IMPORT*)
Answer: C
NEW QUESTION 38
What do you need to consider when performing the SI checks for an SAP S/4HANA conversion? There are 2 correct answers to this question.
- A. The SI checks are executed in the development system and the results are transported into the subsequent systems.
- B. Depending on the SAP S/4HANA version, there are different SI check frameworks.
- C. You need to build up a SI check framework by applying SAP notes.
- D. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.
Answer: B,C
NEW QUESTION 39
You are planning to use DMO of SUM to perform an "inplace-migration" to SAP HANA.
What do you need to consider? Note: there are 2 correct answers to this question.
- A. The target database size increases temporarily because of the Shadow Repository.
- B. SAP HANA Landscape Reorganization required a manual step to edit a file.
- C. Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.
- D. Network capacity between exporting and importing R3load processes must be.
- E. The source system is non-Unicode and the target database is a scale-out system.
Answer: B,C
NEW QUESTION 40
Which steps should be performed during the adjustment of dictionary objects (SPDD) in the development system, before SUM continues?
There are 2 correct answers to this question.
Response:
- A. Release the transport request containing the modification adjustment
- B. Manually activate the adjusted dictionary objects
- C. Assign the transport request as a modification adjustment transport
- D. Create "modified* versions of the objects that you need to adjust
Answer: C,D
NEW QUESTION 41
You are performing an SAP S/4HANA conversion for your production system. This conversion requires that certain business functions are switched on.
Following SAP recommendations, how will you achieve this?
There are 2 correct answers to this question.
Response:
- A. Activate the required business functions manually in the production system.
- B. During conversion, SUM delivers some business functions already activated.
- C. Import a transport request from the development system that contains the recording of the activation.
- D. Specify the business functions that need to be switched on during the prepare part of SUM.
Answer: B,C
NEW QUESTION 42
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM continues with the next phase and your modifications are kept as In the start release
- B. SUM continues with the next phase and your modifications are lost
- C. Before continuing with the next phase SUM asks for a modification adjustment transport
- D. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
Answer: A
NEW QUESTION 43
You downloaded content from the SAP note 1000009 ("ASU Toolbox 2008"). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:
- A. /ASU/START (Start ASU Toolbox)
- B. /ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)
- C. /ASU/SHOW_NOTE (Show SAP Note via Web-Browser)
- D. /ASU/SSM (ASU Simple Schedule Manager)
Answer: A
NEW QUESTION 44
You are planning an SAP S/4HANA conversion. Which conversion-specific tasks need to be performed during the preparation phase?
There are 2 correct answers to this question.
Response:
- A. Check the compatibility of custom code with SAP S/4HANA
- B. Apply the recommendations of the simplification list
- C. Run the database migration to the SAP HANA database
- D. Perform the migration of data into the new data structure
Answer: A,B
NEW QUESTION 45
What is the different between the benchmaking and the repetition option of the Database Migration Option (DMO) of SUM?
- A. The repetition option allows you to repeat the complete migration
- B. The benchmaking option allows you to migration a specified set of tables
- C. The benchmaking option allows you to repeat the uptime migration
- D. The repetition option allows you to run the migration without a shadow system
Answer: B
NEW QUESTION 46
Which additional configuration options are offered by SUM when selecting "Switch expert mode on" in main configuration option "Standard"?
There are 2 correct answers to this question.
Response:
- A. Keep archiving on during the whole procedure.
- B. Reuse a profile for the shadow instance from a previous run.
- C. Use the Near Zero Downtime Maintenance Technology (NZDM).
- D. Choose the instance number of the shadow instance.
Answer: B,D
NEW QUESTION 47
Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above? There are 3 correct answers to this question.
- A. Dual Stack split
- B. Homogenous system copy
- C. Database migration
- D. Release upgrade
- E. Support Package Stack update
Answer: C,D,E
NEW QUESTION 48
You are using the maintenance planner to calculate the required software components for your SAP S4HANA conversion. What do you need to know regarding SUM?
- A. As soon as the next SP level of SUM is available, the current version of SUM passes into "patch on request mode" immediately.
- B. AA
Answer: A
NEW QUESTION 49
What are the benefits of using the Benchmarking option of the DMO for SUM?
There are 2 correct answers to this question.
Response:
- A. You can verify that the content of the download directory matches the stack.XML file.
- B. You can obtain migration duration files that can be used to optimize the next runs from a previous benchmark run.
- C. You can record the modification adjustment during migration and use the transports in the next runs.
- D. You can find the optimal number of parallel R31oad processes by monitoring host performance.
Answer: C,D
NEW QUESTION 50
......
Resources From:
- 2021 Latest TroytecDumps E_S4HCON2022 Exam Dumps (PDF & Exam Engine) Free Share: https://www.troytecdumps.com/E_S4HCON2022-troytec-exam-dumps.html
- 2021 Latest TroytecDumps E_S4HCON2022 PDF and E_S4HCON2022 Exam Dumps Free Share: https://drive.google.com/open?id=1raIAtAxYhHdvDWJmYg7xLIq8XBK6JYe7
Free Resources from TroytecDumps, We Devoted to Helping You 100% Pass All Exams!