CTS-D Sample Practice Exam Questions 2026 Updated Verified
Exam Study Guide Free Practice Test LAST UPDATED CTS-D
NEW QUESTION # 66
What factors MUST be considered when designing and drawing rack elevation diagrams?
Response:
- A. User mobility, competence of the technician, quality of the rack material
- B. Amount of RJ-45 connectors used, amount of conduit used
- C. Equipment manufacturer, model year of equipment, number of USB ports
- D. Ergonomics, weight distribution, RF and IR reception, heat loads, signal separation
Answer: D
NEW QUESTION # 67
In AV system design, what is the purpose of a "commissioning plan"?
- A. To describe equipment warranties
- B. To outline the testing and verification process after installation
- C. To schedule user training sessions
- D. To specify power requirements
Answer: B
NEW QUESTION # 68
For light coming directly from a source such as a lightbulb, what measure and instrument should be used?
Response:
- A. Footcandle with a light impedance meter
- B. Lux with an incident meter
- C. Candela with an incident meter
- D. Foot lambert with an STL
Answer: C
NEW QUESTION # 69
In AV design, what is the primary advantage of using fiber optic cables over copper?
- A. Immunity to electromagnetic interference and longer transmission distances
- B. Easier termination
- C. Lower cost
- D. Higher weight
Answer: A
NEW QUESTION # 70
Which of the following signals can coexist in one conduit without interference?
[Developing AV Designs/Create draft AV design]
Response:
- A. Data network and line-level audio
- B. Speaker level audio and serial control
- C. Video and microphone-level audio
- D. Serial control and video
Answer: D
NEW QUESTION # 71
Which of the following is an example of an AV industry trade organization?
- A. OSHA
- B. AVIXA
- C. IEEE
- D. FCC
Answer: B
NEW QUESTION # 72
Which of the following best describes "RTSP" in video streaming?
- A. A digital video format
- B. A projector specification
- C. A type of camera
- D. Real-Time Streaming Protocol used for controlling streaming media servers
Answer: D
NEW QUESTION # 73
Which of the following best describes "plenum-rated" cable?
- A. Cable with extra shielding for audio signals
- B. Cable for outdoor use
- C. Cable for temporary installations
- D. Cable rated for use in air handling spaces with fire-resistant materials
Answer: D
NEW QUESTION # 74
What is the purpose of a "kick-off" meeting in an AV project?
- A. To train end users
- B. To finalize equipment installation
- C. To start project planning and align stakeholders
- D. To conduct system testing
Answer: C
NEW QUESTION # 75
Which of the following are associated with sound pressure levels?
(Select all that apply.)
Response:
- A. Is typically measured in decibels (dB SPL)
- B. Can most accurately be measured with a Class 0 precision SPL meter
- C. Is the ultimate method for quantifying background noise levels
- D. Eliminates distortion in speech reinforcement
Answer: A,B
NEW QUESTION # 76
Which tool is used to create detailed system wiring diagrams?
- A. Spreadsheet
- B. Word processor
- C. CAD software
- D. Presentation software
Answer: C
NEW QUESTION # 77
How do you confirm the AV System has been built and delivered as per the client's scope?
Response:
- A. Confirm with the client or owner that warranty documentation has been received.
- B. Generate an RFI to the architect or general contractor.
- C. Training has been completed with end users along with turnover of O&M Manuals.
- D. Compare the As-Built drawings and commissioning report to the performance specifications.
Answer: D
NEW QUESTION # 78
According to the ANSI/INFOCOMM 3M-2011 standard, Projected Image System Contrast Ratio, what is the minimum contrast ratio of basic decision-making tasks?
Response:
- A. 50:1
- B. 15:1
- C. 7:1
- D. 80:1
Answer: B
NEW QUESTION # 79
In an AV system, what is the main benefit of using a matrix switcher?
- A. To increase audio power
- B. To convert signals from analog to digital
- C. To amplify video signals
- D. To route multiple inputs to multiple outputs flexibly
Answer: D
NEW QUESTION # 80
When is the commissioning phase of the project?
Response:
- A. When the AV system conceptual design is created
- B. While determining the project goals and needs
- C. While preparing the schematic design
- D. When the construction work is at or near completion
Answer: D
NEW QUESTION # 81
What is the advantage of converting an analog signal to digital?
Response:
- A. Digital signals carry audio and video feeds that analog will not.
- B. Digital signals can address signal degradation, storage, and recording issues.
- C. Digital signals are more energy efficient to broadcast.
- D. Digital signals have more signal headroom.
Answer: B
NEW QUESTION # 82
What is the required bandwidth for 4:1:1 progressive digital video signal (1920 × 1080, 8 bits at 30 Hz)?
Response:
- A. 1.49 Gbps
- B. 1.30 Gbps
- C. 746 Mbps
- D. 3.30 Gbps
Answer: C
NEW QUESTION # 83
......
AVIXA CTS-D - Design Exam Syllabus Topics:
| Topic | Weight |
|---|---|
| Duty A: Conducting a Needs Assessment | 16.8% |
| Task 1: Identify Decision-makers and Stakeholders | 1.6% |
| Task 2: Identify Skill Level of End Users | 2.4% |
| Task 3: Educate AV Clients | 1.6% |
| Task 4: Review Client Technology Master Plan | 3.2% |
| Task 5: Identify Client Expectations | 4% |
| Task 6: Identify Scope of Work | 4% |
| Duty B:Coordinating with Other Professionals to Develop Project Documentation | 23.2% |
| Task 1: Review A/E (architectural and engineering) drawings | 4% |
| Task 2: Coordinate with architectural/interior design professionals | 4% |
| Task 3: Coordinate with Mechanical Professionals | 1.6% |
| Task 4: Coordinate with Structural Professionals | 1.6% |
| Task 5: Coordinate with Electrical Professionals | 3.2% |
| Task 6: Coordinate with lighting professionals | 2.4% |
| Task 7: Coordinate with IT and network security professionals | 4.0% |
| Task 8: Coordinate with acoustical professionals | 1.6% |
| Task 9: Coordinate with life safety and security professionals | 0.8% |
| Duty C: Developing AV Designs | 48% |
| Task 1: Create Draft AV Design | 10.4% |
| Task 2: Confirm site conditions | 8% |
| Task 3: Produce AV infrastructure drawings | 12% |
| Task 4: Produce AV system drawings | 12% |
| Task 5: Finalize Project Documentation | 5.6% |
AVIXA CTS-D Exam Certification Details:
| Number of Questions | 135 |
| Duration | 180 mins |
| Passing Score | 350 / 500 |
| Sample Questions | AVIXA CTS-D Sample Questions |
| MemberExam Price | $475(USD) |
| Exam Code | CTS-D |
The New CTS-D 2026 Updated Verified Study Guides & Best Courses: https://www.troytecdumps.com/CTS-D-troytec-exam-dumps.html
Authentic CTS-D Exam Dumps PDF - 2026 Updated: https://drive.google.com/open?id=1c8-7ocC5nf1wGLos9UrUoTmhteiP4o2q