[Dec-2025] D-NWR-DY-01 Pre-Exam Practice Tests | Exam Questions and Answers for Dell EMC Data Protection Study Guide
Dell NetWorker Deploy v2 Exam Certification Sample Questions
NEW QUESTION # 126
Which Microsoft VSS component gathers information to properly save applications, services, or files in a filesystem?
- A. Writer
- B. Requestor
- C. Interceptor
- D. Provider
Answer: B
NEW QUESTION # 127
A Dell EMC NetWorker backup administrator is configuring a backup to a CIFS share located on a Data Domain system.
Which NetWorker device type is configured?
- A. Data Domain
- B. Tape
- C. AFTD
- D. CloudBoost
Answer: C
NEW QUESTION # 128
The EMC NetWorker software distribution feature is supported on which platform?
- A. MAC
- B. Open VMS
- C. Linux
- D. Netware
Answer: C
NEW QUESTION # 129
When using Dell EMC NetWorker Windows Bare Metal Recovery, what is the requirement for the startup herd disk capacity of the target system?
- A. At least as large as the startup hard disk capacity of the source system
- B. Capacity does not matter as long as it is large enough to hold all data from the source hard disk
- C. Exactly the same size as the startup hard disk capacity of the source system
- D. Smaller than the startup hard tusk capacity of the source system
Answer: B
NEW QUESTION # 130
You are implementing an EMC NetWorker backup solution for a Microsoft SharePoint 2010 distributed farm. The customer has indicated that a SharePoint granular level recovery is required.
Which backup solution needs to be implemented?
- A. EMC NetWorker Module for Microsoft and EMC VSS provider only
- B. EMC NetWorker Module for Microsoft and a third-party recovery tool
- C. EMC NetWorker Module for Microsoft and BR*Tool
- D. EMC NetWorker Module for Databases and Applications and EMC VSS provider
Answer: B
NEW QUESTION # 131
What application does the Enhanced Server Recovery option in EMC NetWorker allow us to interact with?
- A. Home Base
- B. EMC NetWorker module for Microsoft applications
- C. Data Protection Advisor
- D. Avamar
Answer: A
NEW QUESTION # 132
An EMC NetWorker administrator has two LTO-4 tape drives configured on an EMC NetWorker server. One of the two tape drives is dynamically shared with an EMC NetWorker storage node.
The other tape drive is statically assigned to the EMC NetWorker server. The shared drive stops functioning on the EMC NetWorker server but continues to function on the storage node.
How many nsrmmd are now running on the storage node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 133
EMC NetWorker is using a library controlled by an ACSLS server.
Which NetWorker command can be used to discover volumes on the NetWorker server?
- A. nsrjb
- B. jbconfig
- C. nsrmm
- D. jbedit
Answer: A
NEW QUESTION # 134
In a UNIX environment, which NetWorker daemon determines the RPC ports to use to request NetWorker services over the network?
- A. nsrmmd
- B. nsrsnmd
- C. nsrexecd
- D. nsrlcpd
Answer: C
NEW QUESTION # 135
An EMC NetWorker backup environment consists of a large database server to be backed up. Backups are performed nightly.
Which schedule would you use starting on Sunday to minimize the number of save sets required for recovery on Friday morning?
A)
B)
C)
D)
- A. Exhibit D
- B. Exhibit B
- C. Exhibit C
- D. Exhibit A
Answer: D
NEW QUESTION # 136
What type of Microsoft SQL VSS backup is supported in NMM?
- A. Named instance
- B. Synthetic incremental
- C. Transaction logs
- D. Database differential
Answer: A
NEW QUESTION # 137
In a Dell EMC NetWorker backup environment, server parallelism is set to '8'. There are eight clients and each client has one save set. There are two devices in the backup pool and each device is accessible to all clients. Max sessions is set to '2' for both devices.
How many save sessions will be directed to each device?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 138
A customer needs to store backups in an AWS S3 bucket.
Which component must be used to accomplish this task?
- A. Extended Client
- B. CloudBoost
- C. NMDA
- D. NMM
Answer: B
NEW QUESTION # 139
What is a consideration for using the Dell EMC NetWorker block based backup feature?
- A. Backup storage must be deduplication device.
- B. No more than 25 consecutive incremental backups can be created.
- C. Full and incremental backups must be on the same device.
- D. Base client package provides recovery support for all clients.
Answer: D
NEW QUESTION # 140
A Dell EMC Networker backup is configured as a probe-based backup.
What must be configured in the workflow for this backup?
- A. Probe action only
- B. Probe and backup actions
- C. Backup and clone actions
- D. Check Connectivity and probe actions
Answer: B
NEW QUESTION # 141
What is a characteristic of the EMC NetWorker SnapImage module?
- A. Immediate recovery of a file system from a persistent snapshot
- B. Block-level backups of dense file systems
- C. Fast block-level backups of a file system mounted on a proxy server
- D. SAN-based image-level backup and recovery of file systems
Answer: B
NEW QUESTION # 142
Refer to the exhibit.
Based on the save set attribute defined in the EMC NetWorker client properties window, what is backed up?
- A. /gst_on_noos1demo01 directory
- B. NMC database
- C. Media database
- D. NMC installation directory
Answer: B
NEW QUESTION # 143
You want to perform a single file recovery from an EMC NetWorker NDMP backup of a Celerra NAS device. You are performing this restore from a Windows 2003 NetWorker server.
What recovery must be performed?
- A. recover
- B. Directed
- C. nsrsnap recover
- D. nsrndmp_recover
Answer: B
NEW QUESTION # 144
Refer to the exhibit.
A backup administrator configures an EMC NetWorker staging policy to move save sets from backup Device A to backup Device B.
A restore session is started and requires save sets that were staged to Device B.
What is the data flow in this recovery?
- A. Data is reconstructed from Device B to Device A through the storage node and then sent back to the client.
- B. Data is restored to the storage node and copied to the client.
- C. Data goes from Device B through the storage node to the NetWorker server and then to the client.
- D. Data goes from Device B through the storage node and then to the client.
Answer: D
NEW QUESTION # 145
What do you use to interpret the EMC NetWorker daemon.raw file?
- A. nsr_layout
- B. nsr_render_log
- C. nsr_support
- D. nsr_render_raw
Answer: B
NEW QUESTION # 146
An EMC Net Worker storage node has two advanced file type devices that stage the data to two physical LTO-4 drives. Due to a hardware issue, the administrator has put one of the LTO-4 drives in Service mode.
How many nsrmmd processes are now running on the EMC Net Worker storage node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 147
An EMC NetWorker Administrator needs to restore a client file. However, the save set for that backup is in a recoverable state.
What must be done before performing a browsable recovery?
- A. Rebuild the Media database
- B. Change Volume to appendable
- C. Rebuild CFI
- D. Change retention time
Answer: C
NEW QUESTION # 148
What is an advantage of using a Dell EMC Networker synthetic full backup?
- A. Automates the recovery process
- B. Creates a snapshot on only the disk array
- C. Enables users to perform instant restores
- D. Reduces recovery time and steps
Answer: D
NEW QUESTION # 149
......
EMC Exam Practice Test To Gain Brilliante Result: https://www.troytecdumps.com/D-NWR-DY-01-troytec-exam-dumps.html
Tested Material Used To D-NWR-DY-01: https://drive.google.com/open?id=1aV9uBG4fcxX33QHMbmm0mlGjQ0QUJWx9