PASS 350-401 exam with Cisco Real Exam Questions - 100% Valid!
Actual 350-401 Exam Recently Updated Questions with Free Demo
NEW QUESTION 12
Which network devices secure API platform?
- A. web application firewalls
- B. next-generation intrusion detection systems
- C. Layer 3 transit network devices
- D. content switches
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/security/advanced-waf-bot-aag.pdf > Cisco Secure Web Application Firewall (WAF) and bot protection defends your > online presence and ensures that website, mobile applications, and APIs > are secure, protected, and "always on."
> Cisco Secure Web Application Firewall (WAF) and bot protection defends your
> online presence and ensures that website, mobile applications, and APIs Reference: https://www.cisco.com/c/en/us/products/collateral/security/advanced-waf-bot-aag.pdf > Cisco Secure Web Application Firewall (WAF) and bot protection defends your > online presence and ensures that website, mobile applications, and APIs > are secure, protected, and "always on."
NEW QUESTION 13
When configuration WPA2 Enterprise on a WLAN, which additional security component configuration is required?
- A. REDIUS server
- B. TACACS server
- C. NTP server
- D. PKI server
Answer: D
NEW QUESTION 14
Which action is a function of VTEP in VXLAN?
- A. tunneling traffic from IPv6 to IPv4 VXLANs
- B. tunneling traffic from IPv4 to IPv6 VXLANs
- C. encapsulating and de-encapsulating VXLAN Ethernet frames
- D. allowing encrypted communication on the local VXLAN Ethernet segment
Answer: C
Explanation:
VTEPs connect between Overlay and Underlay network and they are responsible for encapsulating frame into VXLAN packets to send across IP network (Underlay) then decapsulating when the packets leaves the VXLAN tunnel.
VTEPs connect between Overlay and Underlay network and they are responsible for encapsulating frame into VXLAN packets to send across IP network (Underlay) then decapsulating when the packets leaves the VXLAN tunnel.
NEW QUESTION 15
Drag and drop the descriptions from the left onto the QoS components they describe on the right.
Answer:
Explanation:
NEW QUESTION 16
Drag and drop the characteristics from the left onto the correct routing protocol types on the right.
Answer:
Explanation:
Explanation
1,3,6EIGRP,2,4,5OSPF
NEW QUESTION 17
What is the result when an active route processor fails that combines NSF with SSO?
- A. An NSF-aware device immediately updates the standby route processor RIB without churning the network.
- B. The standby route processor immediately takes control and forwards packets along known routes.
- C. An NSF-capable device immediately updates the standby route processor RIB without churning the network.
- D. The standby route processor temporarily forwards packets until route convergence is complete.
Answer: B
NEW QUESTION 18
Drag and drop the LISP components on the left to their descriptions on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 19
Refer to the exhibit.
An engineer must modify the access control list EGRESS to allow all IP traffic from subnet 10.1.10.0/24 to
10.1.2.0/24. The access control list is applied in the outbound direction on router interface GigabitEthemet 0/1.
Which configuration commands can the engineer use to allow this traffic without disrupting existing traffic flows?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION 20
Refer to the exhibit.
What step resolves the authentication issue?
- A. restart the vsmart host
- B. use basic authentication
- C. target 192 168 100 82 in the URI
- D. change the port to 12446
Answer: D
NEW QUESTION 21
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
- A. Type 1 hypervisor enables other operating systems to run on it.
- B. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques.
- C. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS.
- D. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
Answer: C
Explanation:
Explanation
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. answer 'Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS' big advantage of Type 2 hypervisors is that management console software is not required. Examples of type 2 hypervisor are VMware Workstation (which can run on Windows, Mac and Linux) or Microsoft Virtual PC (only runs on Windows).
NEW QUESTION 22
Which tool is used in Cisco DNA Center to build generic configurations that are able to be applied on device with similar network settings?
- A. Authentication Template
- B. Command Runner
- C. Template Editor
- D. Application Policies
Answer: C
Explanation:
Explanation
Cisco DNA Center provides an interactive editor called Template Editor to author CLI templates. Template Editor is a centralized CLI management tool to help design a set of device configurations that you need to build devices in a branch. When you have a site, office, or branch that uses a similar set of devices and configurations, you can use Template Editor to build generic configurations and apply the configurations to one or more devices in the branch.
NEW QUESTION 23
Which two steps are required for a complete Cisco DNA Center upgrade? (Choose two.)
- A. system update
- B. application updates
- C. proxy configuration
- D. automation backup
- E. golden image selection
Answer: A,B
Explanation:
Explanation
A complete Cisco DNA Center upgrade includes "System Update" and "Appplication Updates"
NEW QUESTION 24
What NTP Stratum level is a server that is connected directly to an authoritative time source?
- A. Stratum 0
- B. Stratum 1
- C. Stratum 14
- D. Stratum 15
Answer: A
Explanation:
The stratum levels define the distance from the reference clock. A
reference clock is a stratum 0 device that is assumed to be accurate and
has little or no delay associated with it. Stratum 0 servers cannot be used
on the network but they are directly connected to computers which then
operate as stratum-1 servers. A stratum 1 time server acts as a primary
network time standard.
A stratum 2 server is connected to the stratum 1 server; then a stratum 3
server is connected to the stratum 2 server and so on. A stratum 2 server
gets its time via NTP packet requests from a stratum 1 server. A stratum 3
server gets its time via NTP packet requests from a stratum-2 server... A
stratum server may also peer with other stratum servers at the same level
to provide more stable and robust time for all devices in the peer group
(for example a stratum 2 server can peer with other stratum 2 servers).
NTP uses the concept of a stratum to describe how many NTP hops away a
machine is from an authoritative time source. A stratum 1 time server
typically has an authoritative time source (such as a radio or atomic clock,
or a Global Positioning System (GPS) time source) directly attached, a
stratum 2 time server receives its time via NTP from a stratum 1 time
server, and so on.
Reference:
figuration/guide/bsm/16-6-1/b-bsm-xe-16-6-1-asr920/bsm-timecalendar-
set.html
NEW QUESTION 25
Refer to the exhibit.
Which privilege level is assigned to VTY users?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 26
What is a benefit of data modeling languages like YANG?
- A. They make the CLI simpler and more efficient.
- B. They enable programmers to change or write their own application within the device operating system.
- C. They create more secure and efficient SNMP OIDs.
- D. They provide a standardized data structure, which results in configuration scalability and consistency.
Answer: D
Explanation:
Explanation
Yet Another Next Generation (YANG) is a language which is only used to describe data models (structure). It is not XML or JSON.
NEW QUESTION 27
Drag the drop the description from the left onto the routing protocol they describe on the right.
Answer:
Explanation:
NEW QUESTION 28
An engineer must configure interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. Which command set must be added to the initial configuration to accomplish this task?
- A. vrrp group 10 ip 172.16.13 254.255.255.255.0
vrrp group 10 priority 120 - B. standby 10 ip 172.16.13.254 255.255.255.0
standby 10 preempt - C. vrrp 10 ip 172.16.13.254
vrrp 10 preempt - D. standby 10 ip 172.16.13.254
standby 10 priority 120
Answer: C
Explanation:
Explanation
In fact, VRRP has the preemption enabled by default so we don't need the vrrp 10 preempt command. The default priority is 100 so we don't need to configure it either. But notice that the correct command to configure the virtual IP address for the group is vrrp 10 ip {ip-address} (not vrrp group 10 ip ...) and this command does not include a subnet mask.
NEW QUESTION 29
When using TLS for syslog, which configuration allows for secure and reliable transportation of messages to its default port?
- A. logging host 10.2.3.4 vrf mgmt transport tcp port 6514
- B. logging host 10.2.3.4 vrf mgmt transport tcp port 514
- C. logging host 10.2.3.4 vrf mgmt transport udp port 514
- D. logging host 10.2.3.4 vrf mgmt transport udp port 6514
Answer: A
Explanation:
The TCP port 6514 has been allocated as the default port for syslog over Transport Layer Security (TLS).
NEW QUESTION 30
Drag and drop the characteristics from the left onto the protocols they apply to on the right?
Answer:
Explanation:
NEW QUESTION 31
Drag and drop the REST API authentication method from the left to the description on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 32
Which exhibit displays a valid JSON file?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
NEW QUESTION 33
Which network devices secure API platform?
- A. web application firewalls
- B. next-generation intrusion detection systems
- C. Layer 3 transit network devices
- D. content switches
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/security/advanced-waf-bot-aag.pdf > Cisco® Secure Web Application Firewall (WAF) and bot protection defends your > online presence and ensures that website, mobile applications, and APIs > are secure, protected, and "always on."
> Cisco® Secure Web Application Firewall (WAF) and bot protection defends your
> online presence and ensures that website, mobile applications, and APIs Reference: https://www.cisco.com/c/en/us/products/collateral/security/advanced-waf-bot-aag.pdf > Cisco® Secure Web Application Firewall (WAF) and bot protection defends your > online presence and ensures that website, mobile applications, and APIs > are secure, protected, and "always on."
NEW QUESTION 34
Refer to the exhibit.
Which action resolves the EtherChannel issue between SW2 and SW3?
- A. Configure switchport nonegotiate on SW3
- B. Configure channel-group 1 mode active on both interfaces.
- C. Configure channel-group 1 mode desirable on both interfaces.
- D. Configure switchport mode trunk on SW2.
Answer: B
NEW QUESTION 35
Which technology is used to provide Layer 2 and Layer 3 logical networks in the Cisco SD-Access architecture?
- A. overlay network
- B. VPN routing/forwarding
- C. underlay network
- D. easy virtual network
Answer: A
Explanation:
NEW QUESTION 36
Refer to the exhibit.
An engineer implemented several configuration changes and receives the logging message on switch1. Which action should the engineer take to resolve this issue?
- A. Change Switch2 to switch port mode dynamic auto
- B. Change the VTP domain to match on both switches
- C. Change Switch1 to switch port mode dynamic auto
- D. Change Switch1 to switch port mode dynamic desirable
Answer: B
NEW QUESTION 37
......
What Are the Career Opportunities?
If you manage to get the passing score in 350-401 exam and earn your Specialist certification, then you should know that you become eligible for numerous roles, these are a few of them:
- Network engineer
- Network administrator
- Network support technician
- Help desk technician
Notice, that you'll have a way more options if you decide to earn the CCNP or any of the related CCIE certificates. When it comes to the average annual salary that you can expect, Payscale.com mentions that you can earn about $61k in one year as a Cisco Specialist, and $96k or $127k per annum as Cisco professional or expert, respectively.
350-401 Free Sample Questions to Practice One Year Update: https://www.troytecdumps.com/350-401-troytec-exam-dumps.html
Free Cisco 350-401 Exam Questions: https://drive.google.com/open?id=14CykF0MZ0MaoJC0CNx4u4BAOhan7F4S8