PASS 220-1101 exam with CompTIA Real Exam Questions - 100% Valid!
Actual 220-1101 Exam Recently Updated Questions with Free Demo
NEW QUESTION # 300
When a page that was printed on a laser printer is touched. the image on the paper smears. Which of the following is most likely the cause of this issue?
- A. Toner
- B. Fuser
- C. Transfer belt
- D. Duplexing assembly
Answer: B
Explanation:
Explanation
The fuser is the part of a laser printer that uses heat and pressure to fuse the toner to the paper. If the fuser is defective or not hot enough, the toner may not adhere properly and smear when touched. The duplexing assembly, toner, and transfer belt are not related to this issue.
Reference: Official CompTIA learning resources CompTIA A+ Core 1 and Core 2, page 11.
NEW QUESTION # 301
A technician is relocating a router access point farther away from the modem to optimize signal coverage for a SOHO client. Which of the following will the technician most likely use to complete the relocation? (Select two).
- A. Loopback plug
- B. Crimper
- C. Punchdown tool
- D. Clamp-style wire stripper
- E. Network tap
- F. Wi-Fi analyzer
Answer: B,F
Explanation:
Explanation
A crimper is a tool that is used to attach connectors to network cables, such as RJ-45 or RJ-11. A technician might need a crimper to create a longer cable for the router access point or to replace a damaged connector.
A Wi-Fi analyzer is a software or hardware tool that can scan and measure the wireless signal strength, interference, channel usage, and security of a Wi-Fi network. A technician might need a Wi-Fi analyzer to find the optimal location and configuration for the router access point to improve the signal coverage for the SOHO client.
References
*[CompTIA A+ Core 1 (220-1001) Certification Study Guide], page 77
*[CompTIA A+ Core 1 (220-1001) Certification Study Guide], page 82
*[What is a Crimper?]
*[What is a Wi-Fi Analyzer?]
NEW QUESTION # 302
A user attempts to connect a laptop to a projector but receives the following message from the projector: Out of Range. Which of the following needs to be addressed first?
- A. Verify that the laptop video card driver is the most up-to-date version.
- B. Change the resolution settings.
- C. Check the video cable and replace it if necessary.
- D. Set the computer's display settings to extend/duplicate.
Answer: B
Explanation:
Explanation
The most likely answer is A. Change the resolution settings.
The error "Out of Range" normally means that the resolution being output by the computer is not compatible with the projector. The resolution is the number of pixels that are displayed on the screen. If the resolution is too high for the projector, it may not be able to display the image correctly or at all12.
To resolve this issue, you should try lowering the resolution settings on your laptop to match the native resolution of the projector or a lower one. You can do this by following these steps1:
*Right-click on an empty area of your desktop and select Display settings.
*Under Scale and layout, click on Display resolution and choose a lower option from the drop-down menu.
*Click Apply and then Keep changes.
*Reconnect your laptop to the projector and check if the image is displayed properly.
If changing the resolution settings does not help, you may need to check other factors, such as the video cable, the display settings, or the video card driver. However, these are less likely to cause the "Out of Range" error than the resolution settings.
NEW QUESTION # 303
A technician responds to a help desk ticket that indicates a user's workstation is not booting. The technician initially suspects a failed hard drive. The technician performs diagnostics and confirms the hard drive is fully operational.
Which of the following steps should the technician complete NEXT?
- A. Consider another possible cause of the issue.
- B. Reinstall the operating system.
- C. Report the status of the drive and close the ticket.
- D. Restore the latest backup of the system.
- E. Configure a new RAID array.
Answer: D
Explanation:
Explanation
Since the hard drive appears to be functioning normally, the technician should investigate other potential causes of the issue. This could include checking the BIOS settings, verifying the connections to the hard drive, and testing the RAM. Once these steps have been completed, the technician can then take the necessary steps to resolve the issue.
NEW QUESTION # 304
A technician replaced a motherboard on a server, and now the 64-bit hypervisor is not loading correctly. Which of the following needs to be enabled for the hypervisor to run?
- A. vPro
- B. VT-d
- C. Hyperthreading
- D. Hardware prefetcher
Answer: B
NEW QUESTION # 305
A user needs to upgrade a PC in order to run the latest 3-D design software. Which of the following components should the user upgrade to best meet this requirement?
- A. Graphics card
- B. Memory
- C. Motherboard
- D. CPU
- E. Power supply
Answer: A
Explanation:
The correct answer is D. Graphics card.
A graphics card is a component that handles the processing and rendering of 3D graphics on a PC. A graphics card can significantly improve the performance and quality of 3D design software, as it can handle complex calculations and display high-resolution images faster than the CPU. A graphics card can also support features such as ray tracing, anti-aliasing, and texture mapping, which can enhance the realism and detail of 3D models.
A) Motherboard. This is not a correct answer. A motherboard is a component that connects and communicates with all the other components in a PC. A motherboard does not directly affect the performance or quality of 3D design software, unless it is incompatible or outdated with the other components.
B) CPU. This is not a correct answer. A CPU is a component that executes instructions and calculations for various programs on a PC. A CPU can affect the performance and quality of 3D design software, but not as much as a graphics card. A CPU is more important for tasks such as compiling, encoding, or multitasking, which are not specific to 3D design.
C) Power supply. This is not a correct answer. A power supply is a component that converts AC power from the wall outlet to DC power for the PC components. A power supply does not directly affect the performance or quality of 3D design software, unless it is insufficient or faulty to provide enough power for the other components.
E) Memory. This is not a correct answer. Memory is a component that stores data temporarily for fast access by the CPU and other components. Memory can affect the performance and quality of 3D design software, but not as much as a graphics card. Memory is more important for tasks such as loading, saving, or switching between programs, which are not specific to 3D design.
NEW QUESTION # 306
Which of the following describes the BEST use case for a client-side hypervisor?
- A. When the data center environment is out of resources for a new server
- B. To provide a backup to cloud-based solutions during internet failures
- C. By For a software developer who is required to test an application in many environments
- D. As a cost-saving measure to allow multiple users on one computer
Answer: C
Explanation:
A client-side hypervisor is a virtual machine monitor (VMM) that resides in and virtualizes a user's computer, allowing it to run multiple operating systems (or virtual machines) on shared hardware12. A client-side hypervisor can be useful for a software developer who needs to test an application in many environments, such as different versions of Windows, Linux, or Mac OS. By using a client-side hypervisor, the developer can switch between different virtual machines without rebooting the computer or using multiple physical devices3.
NEW QUESTION # 307
A remote user reports connectivity issues with the local internet provider. Even after a technician reboots the modem supplied by the ISP. the issue persists. Which of the following would BEST establish the connection in minimal time?
- A. Neighbor's Wi-Fi
- B. Fiber optic
- C. Radio frequency ISP
- D. Mobile hotspot
Answer: D
Explanation:
Using a mobile hotspot is the best way to establish an internet connection in minimal time for a remote user who is experiencing connectivity issues with the local internet provider. A mobile hotspot can be set up quickly and provides a reliable connection using cellular data. Reference: CompTIA A+ Certification Exam Objectives 1001, 3.4
NEW QUESTION # 308
Which of the following DNS records is used to look up the IP address assigned to a domain name?
- A. SPF
- B. A
- C. MX
- D. NS
Answer: B
Explanation:
Explanation
A DNS record is a data entry in a DNS server that maps a domain name to a specific value, such as an IP address, a mail server, a name server, or a text string. There are different types of DNS records for different purposes, and each type has a specific format and syntax12.
The A record, also known as the address record, is the most common type of DNS record, and it is used to look up the IP address assigned to a domain name. The A record maps a domain name to an IPv4 address, which is a 32-bit numerical value that identifies a device on the internet. For example, the A record for www.google.com is 172.217.14.20612.
The other options are not correct because they are not used to look up the IP address assigned to a domain name. The MX record, also known as the mail exchange record, is used to specify the mail servers that handle the email for a domain name. The MX record maps a domain name to a priority value and a host name of a mail server. For example, the MX record for gmail.com is 10 alt1.gmail-smtp-in.l.google.com12.
The NS record, also known as the name server record, is used to delegate a domain name to a set of authoritative name servers. The NS record maps a domain name to a host name of a name server that can provide authoritative answers for the domain name and its subdomains. For example, the NS record for example.com is ns1.example.com12.
The SPF record, also known as the sender policy framework record, is used to prevent email spoofing and spamming by validating the sender's identity. The SPF record maps a domain name to a text string that specifies the authorized mail servers and IP addresses that can send email on behalf of the domain name. For example, the SPF record for microsoft.com is v=spf1 include:spf.protection.outlook.com -all12.
References:
DNS Configuration - CompTIA A+ 220-1101 - 2.6
CompTIA A+ Certification Core 1 (220-1101) [Video] - Packt Subscription, Section 2: Networking, Video 2.6: DNS Configuration CompTIA A+ Certification Core 1 (220-1101) - GitHub, Slide Handout PDFs 1101, Chapter 2:
Networking, Slide 2.6: DNS Configuration
NEW QUESTION # 309
A technician is replacing a ribbon on a printer that produces faded text and Images when priming. Which of the following types of primers is the technician working on?
- A. Inkjet
- B. Laser
- C. Thermal
- D. Impact
Answer: D
Explanation:
An impact printer is a type of printer that uses a ribbon to produce text and images on paper. If an impact printer is producing faded text and images when printing, it could be due to a worn-out ribbon that needs to be replaced. The technician would need to replace the ribbon on the impact printer to resolve the issue.
A ribbon is a consumable component used in impact printers that uses a cloth or plastic strip coated with ink to produce text and images on paper. Examples of impact printers include dot matrix printers and line printers. Reference: Study Guide Section 4.6 - Printer technologies
NEW QUESTION # 310
A user's laptop will not turn on for a meeting in a conference room. However, the laptop turns on correctly when connected to the external monitor, mouse, and keyboard at the user's desk. Which of the following should a technician do to ensure that the laptop functions everywhere in the office?
- A. Issue a peripheral set for use in the conference room.
- B. Reinstall the laptop's operating system.
- C. Replace the laptop's battery.
- D. Enable a remote desktop account.
Answer: C
Explanation:
Explanation
A laptop's battery is the component that provides power to the laptop when it is not connected to an external power source, such as a wall outlet or a docking station. A laptop's battery can wear out over time, losing its capacity and ability to hold a charge. This can cause the laptop to not turn on or shut down unexpectedly when it is not plugged in .
According to some web search results , some signs and symptoms of a failing laptop battery are:
*The laptop does not turn on or turns off suddenly when it is not connected to an external power source
*The laptop shows a low battery warning or a red X over the battery icon even when it is fully charged
*The laptop takes longer to charge or does not charge at all
*The laptop feels hot or the battery bulges or leaks
To fix this issue, the technician should replace the laptop's battery with a new one that is compatible with the laptop model and specifications. The technician should also dispose of the old battery properly, following the environmental and safety guidelines .
Reinstalling the laptop's operating system, enabling a remote desktop account, or issuing a peripheral set for use in the conference room are not effective solutions for this issue, since they do not address the root cause of the problem, which is the faulty battery. Reinstalling the operating system may erase the user's data and settings, and it may not improve the laptop's performance or power management. Enabling a remote desktop account may allow the user to access their files and applications from another device, but it does not solve the problem of the laptop not turning on. Issuing a peripheral set for use in the conference room may provide the user with an external monitor, mouse, and keyboard, but it does not guarantee that the laptop will work without an external power source.
NEW QUESTION # 311
A small ISP has hired a new technician Joe, the new technician, is being trained to configure customers* home networks The trailing instructor gives me technician a starter kit with cables, cable ends, and other network equipment and asks mm to build a working network.
The computer should be connected to have internet connectivity and the phone should be connected to have a dial tone.
INSTRUCTIONS
Use the appropriate cables. cable ends, tools and equipment to configure the network ana connect an components accordingly There are 3 steps and the simulation starts on step 1.
Answer:
Explanation:
See the answer below in explanation part.
Explanation
Answer of both steps below.
A picture containing text, screenshot, indoor Description automatically generated
Diagram Description automatically generated with medium confidence
NEW QUESTION # 312
A systems administrator needs to set up a multifunction printer for the legal department. The legal department deals with sensitive documents and requires a secure method of releasing print jobs. Which of the following should the systems administrator configure to meet the department's security requirements?
- A. Audit logging
- B. Wired connection
- C. User authentication
- D. SMB settings
Answer: C
Explanation:
Explanation
This option requires the user to enter a PIN code or swipe a smart card before the printer releases their print job. This way, the user can verify their identity and ensure that no one else can access their sensitive documents.
The other options are not as secure or effective as user authentication. SMB settings are used to share files and printers over a network, but they do not provide a secure method of releasing print jobs. Audit logging records the details of each print job, but it does not prevent unauthorized access to the printed documents. Wired connection reduces the risk of wireless interference or hacking, but it does not guarantee that the print jobs are only retrieved by the intended recipient.
NEW QUESTION # 313
After a corporate office upgraded its Ethernet wiring, a number of users are unable to access the internet. A technician establishes a theory for troubleshooting the issue and tests it, but the theory is incorrect. Which of the following should the technician do next?
- A. Gather additional details.
- B. Identify user changes.
- C. Document the findings.
- D. Escalate the problem.
Answer: A
Explanation:
The correct answer is B. Gather additional details.
According to the CompTIA troubleshooting process for the A+ certification exams1, the technician should gather additional details after testing a theory that is incorrect. This step helps to identify the problem more accurately and establish a new theory of probable cause. The other options are not appropriate for this stage of the troubleshooting process. Documenting the findings, escalating the problem, and identifying user changes are steps that should be done later in the process, after determining the cause and implementing a solution1.
NEW QUESTION # 314
A technician installs a new printer for a workstation and tries to print a test page, but the page does not print.
The technician looks at the print queue and notices that the printer is called 'Generic Printer." Which of the following BEST describes what the technician should do to fix this issue?
- A. Connect the printer with a USB cable rather than over the network.
- B. Install the appropriate printer drivers for the OS.
- C. Install the correct toner in the printer.
- D. Set the printer trays to allow duplex printing
Answer: B
NEW QUESTION # 315
A technician verifies the slow boot time and slow OS performance of a tower server with a RAID 5 on a PCIe RAID card that does not support hot swapping. Which of the following steps should the technician take NEXT to verify RAID health?
- A. Shut down the server and check the RAID controller's status.
- B. Verify S.M.A.R.T. operation on the RAID card.
- C. Physically clean the HDDs and connectors.
- D. Replace the failed drive while users are connected
Answer: A
Explanation:
Since the RAID card does not support hot swapping, the technician needs to shut down the server and check the RAID controller's status to verify RAID health. S.M.A.R.T. is a feature of hard drives, not RAID cards. Replacing the failed drive while users are connected could cause data loss or corruption. Physically cleaning the HDDs and connectors is unlikely to solve the slow boot time and performance issues.
NEW QUESTION # 316
A user is researching hard drives to upgrade a PC and has decided to purchase a NVMe drive. Which of the following Should the user confirm are available on the PC before making the purchase? (Select TWO).
- A. SATA
- B. DRAM
- C. M.2
- D. SAS
- E. SCSI
- F. PCIe
Answer: C,F
Explanation:
Explanation
NVMe (Non-Volatile Memory Express) drives are high-speed solid-state drives that utilize the PCIe (Peripheral Component Interconnect Express) interface to connect to the motherboard. Before purchasing an NVMe drive, the user should confirm that the PC has an available M.2 slot for the drive and that the PC has a PCIe interface for the M.2 slot.
SATA (Serial ATA) is an older interface for hard drives and is not compatible with NVMe drives. SAS (Serial Attached SCSI) is a newer interface for hard drives and is typically used for enterprise-level storage systems.
SCSI (Small Computer System Interface) is a parallel interface for hard drives that is primarily used in high-end workstations and servers. DRAM (Dynamic Random Access Memory) is a type of memory commonly used in computers, but it is not relevant to the storage of data on a hard drive.
Reference: CompTIA A+ Core 1 Exam Guide, page 267.
NEW QUESTION # 317
......
CompTIA 220-1101 exam evaluates the foundational knowledge and skills required to support operating systems, hardware, software, and networks. 220-1101 exam covers a broad range of topics, including mobile devices, networking technology, hardware components, virtualization and cloud computing, and troubleshooting methodology. 220-1101 exam consists of 90 questions, and candidates have 90 minutes to complete the test.
CompTIA A+ Certification Exam: Core 1 is a computer-based exam that consists of 90 multiple-choice and performance-based questions. 220-1101 exam duration is 90 minutes, and the passing score is 675 out of 900. 220-1101 exam is available in English, Japanese, Portuguese, Spanish, German, and Thai languages. 220-1101 exam fee is $232, and candidates can register for the exam on the CompTIA website or Pearson VUE testing centers.
220-1101 Free Sample Questions to Practice One Year Update: https://www.troytecdumps.com/220-1101-troytec-exam-dumps.html
Free CompTIA 220-1101 Exam Questions: https://drive.google.com/open?id=1xAOKiiIplCsS32lo3Zep4JrrW8vFBOGz