New TroytecDumps 350-401 Exam Questions| Real 350-401 Dumps Updated on Oct 27, 2026
350-401 Braindumps – 350-401 Questions to Get Better Grades
Cisco 350-401 exam is part of the new CCNP Enterprise certification path and is designed for network engineers who are interested in advancing their skills and knowledge of Cisco Enterprise Network technologies. 350-401 exam is essential for professionals who want to take their career to the next level and become experts in implementing and managing Cisco Enterprise Networks.
Cisco 350-401 ENCOR exam is a certification test that is designed to validate the skills and knowledge of IT professionals in implementing core enterprise network technologies. 350-401 exam is a part of the Cisco Certified Network Professional (CCNP) Enterprise certification program and is aimed at individuals who want to prove their expertise in designing, configuring, and managing enterprise networks.
NEW QUESTION # 73
A wireless consultant is designing a high-density wireless network for a lecture hall for 1000 students Which antenna type is recommended for this environment?
- A. dipole antenna
- B. parabolic dish
- C. omnidirectional antenna
- D. sector antenna
Answer: C
Explanation:
Explanation
Directional antennas Directional antennas come in many different styles and shapes. An antenna does not offer any added power to the signal; it simply redirects the energy it receives from the transmitter. By redirecting this energy, it has the effect of providing more energy in one direction and less energy in all other directions. As the gain of a directional antenna increases, the angle of radiation usually decreases, providing a greater coverage distance but with a reduced coverage angle. Directional antennas include patch antennas and parabolic dishes. Parabolic dishes have a very narrow RF energy path, and the installer must be accurate in aiming these types of antennas at each other.
Directional patch antenna
Reference:
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/product_data_sheet091 Omnidirectional antennas An omnidirectional antenna is designed to provide a 360-degree radiation pattern. This type of antenna is used when coverage in all directions from the antenna is required. The standard 2.14-dBi "rubber duck" is one style of omnidirectional antenna.
Omnidirectional antenna
-> Therefore Omnidirectional antenna is best suited for a high-density wireless network in a lecture hall.
NEW QUESTION # 74
Which network devices secure API platform?
- A. content switches
- B. Layer 3 transit network devices
- C. web application firewalls
- D. next-generation intrusion detection systems
Answer: C
NEW QUESTION # 75
An engineer must configure a new loopback interface on a router and advertise the interface as a
/24 in OSPF. Which command set accomplishes this task?
- A. R2(config-router)#network 172.22.2.0 0.0.0.255 area 0
R2(config)#interface Loopback0
R2(config-if)#ip address 172.22.2.1 255.255.255.0
R2(config-if)#ip ospf 100 area 0 - B. R2(config)#interface Loopback0
R2(config-if)#ip address 172.22.2.1 255.255.255.0
R2(config-if)#ip ospf network point-to-point
R2(config-if)#ip ospf 100 area 0 - C. R2(config)#interface Loopback0
R2(config-if)#ip address 172.22.2.1 255.255.255.0
R2(config-if)#ip ospf network broadcast
R2(config-if)#ip ospf 100 area 0 - D. R2(config)#interface Loopback0
R2(config-if)#ip address 172.22.2.1 255.255.255.0
R2(config-if)#ip ospf network point-to-multipoint
R2(config-if)#router ospf 100
Answer: B
Explanation:
Although the configured loopback address is 172.22.2.1/24 but by default OSPF will advertise this route to loopback0 as 172.22.2.1/32 (most specific route to that loopback). In order to override this, we have to change the network type to point-to-point. After this OSPF will advertise the address to loopback as 172.22.2.0/24.
NEW QUESTION # 76
A network engineer must configure a switch to allow remote access for all feasible protocols. Only a password must be requested for device authentication and all idle sessions must be terminated in 30 minutes. Which configuration must be applied?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
Explanation:
To allow remote access for all feasible protocols while only requesting a password for device authentication and terminating all idle sessions in 30 minutes, the configuration must include setting up lines for remote access protocols like Telnet or SSH, specifying a password for loginauthentication, and configuring an exec-timeout of 30 minutes. This ensures that users can remotely access the switch using various protocols, are authenticated using a password, and that any idle sessions are automatically terminated after the specified time to maintain security.
NEW QUESTION # 77
Refer to the exhibit.
Refer to the exhibit. An engineer must allow the FTP traffic from users on 172.16.1.0 /24 to 172.16.2.0 /24 and block all other traffic. Which configuration must be applied?
A)
B)
C)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION # 78
Which statement about TLS is accurate when using RESTCONF to write configurations on network devices?
- A. It is not supported on Cisco devices
- B. It requires certificates for authentication
- C. It is used for HTTP and HTTPS requests
- D. It is provided using NGINX acting as a proxy web server
Answer: C
NEW QUESTION # 79 
Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3.
Which configuration corrects the issue?
- A. SW1(config)#int gi1/1
SW1(config)#switchport trunk allowed vlan 1-9,11-4094 - B. SW2(config)#int gi1/2
SW2(config)#switchport trunk allowed vlan 1-9,11-4094 - C. SW2(config)#int gi1/2
SW2(config)#switchport trunk allowed vlan 10 - D. SW1(config)#int gi1/1
SW1(config)#switchport trunk allowed vlan 10
Answer: A
NEW QUESTION # 80
A network engineer configures BGP between R1 and R2. Both routers use BGP peer group CORP and are set up to use MD5 authentication. This message is logged to the console of router R1:
Which two configuration allow peering session to from between R1 and R2? Choose two.)
- A. R1(config-router)#neighbor 10.10.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
- B. R1(config-router)#neighbor 10.120.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
- C. R2(config-router)#neighbor 10.120.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco
- D. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor PEER password Cisco
- E. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco
Answer: A,E
Explanation:
The error message indicates an MD5 authentication failure between the two BGP peers. The IP addresses involved are 10.10.10.1 and 10.120.10.1, which should correspond to R1 and R2 respectively. The correct configurations to resolve this issue would be to ensure that both routers are configured with the same password for MD5 authentication within the same peer group CORP.
Option A is correct because it configures R1 with the CORP peer group and sets the password to "Cisco" for MD5 authentication.
Option E is correct because it configures R2 with a neighbor in the CORP peer group at IP address 10.10.10.1 (which should be R1) and sets the password to "Cisco" for MD5 authentication.
References := Implementing and Operating Cisco Service Provider Network Core Technologies
NEW QUESTION # 81
Which control plane protocol is used between Cisco SD-WAN routers and vSmart controllers?
- A. BGP
- B. OMP
- C. UDP
- D. TCP
Answer: B
Explanation:
Explanation
Cisco SD-WAN uses Overlay Management Protocol (OMP) which manages the overlay network. OMP runs between the vSmart controllers and WAN Edge routers (and among vSmarts themselves) where control plane information, such as the routing, policy, and management information, is exchanged over a secure connection.
NEW QUESTION # 82 
Refer to the exhibit. A network engineer must configure NETCONF. After creating the configuration, the engineer gets output from the command show line, but not from show running-config. Which command completes the configuration?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION # 83 
Answer:
Explanation:
See the solution below in Explanation:
Explanation:
Solution:
router bgp 10
bgp router-id 10.1.1.111
no bgp defa ipv4-unicast
nei 209.165.200.226 remote-as 20
nei 209.165.202.130 remote-as 30
address-family ipv4
neigh 209.165.200.226 activate
neigh 209.165.202.130 activate
network 10.1.1.10 mask 255.255.255.255
network 209.165.201.10 mask 255.255.255.255
network 209.165.201.20 mask 255.255.255.255
wr
NEW QUESTION # 84
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 85
Refer to the exhibit.
What are two effects of this configuration? (Choose two.)
- A. Inside source addresses are translated to the 209.165.201.0/27 subnet.
- B. The 209.165.201.0/27 subnet is assigned as the outside local address range.
- C. The 10.1.1.0/27 subnet is assigned as the inside local addresses.
- D. The 10.1.1.0/27 subnet is assigned as the inside global address range.
- E. It establishes a one-to-one NAT translation.
Answer: A,C
NEW QUESTION # 86
Exhibit.
Security policy requires all idle-exec sessions to be terminated in 600 seconds. Which configuration achieves this goal?
- A. line vty 0 4exec-timeout 600
- B. line vty 0 15absolute-timeout 600
- C. line vty 01 5exec-timeout 10 0
- D. line vty 0 15exec-timeout
Answer: C
NEW QUESTION # 87
An engineer is describing QoS to a client. Which two facts apply to traffic policing? (Choose two.)
- A. Policing adapts to network congestion by queuing excess traffic
- B. Policing should be performed as close to the destination as possible
- C. Policing drops traffic that exceeds the defined rate
- D. Policing typically delays the traffic, rather than drops it
- E. Policing should be performed as close to the source as possible
Answer: C,E
Explanation:
Traffic policing propagates bursts. When the traffic rate reaches the configured
maximum rate (or committed information rate), excess traffic is dropped (or
remarked). The result is an output rate that appears as a saw-tooth with crests and
troughs.
Unlike traffic shaping, traffic policing does not cause delay.
Classification (which includes traffic policing, traffic shaping and queuing
techniques) should take place at the network edge. It is recommended that
classification occur as close to the source of the traffic as possible.
Also according to this Cisco link, "policing traffic as close to the source as possible".
NEW QUESTION # 88
In a Cisco SD-Access fabric, which control plane protocol is used for mapping and resolving endpoints?
- A. SXP
- B. DHCP
- C. LISP
- D. VXLAN
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html
NEW QUESTION # 89
Refer to the exhibit.
CR2 and CR3 ate configured with OSPF. Which configuration, when applied to CR1. allows CR1 to exchange OSPF Information with CR2 and CR3 but not with other network devices or on new Interfaces that are added to CR1?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 90
......
One of the main benefits of achieving the Cisco 350-401 certification is that it demonstrates a comprehensive understanding of enterprise-level network technologies. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification is recognized globally and is a great way to showcase your skills and knowledge to potential employers. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification exam is designed to test the candidate’s ability to plan, implement, and troubleshoot enterprise-level networks.
350-401 Exam Dumps - Try Best 350-401 Exam Questions: https://www.troytecdumps.com/350-401-troytec-exam-dumps.html
Get New 350-401 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1OEPlWugRa5S-RYFvCkmIDI3J5TbHcW6J